BRITE GALVANIZE  

PRIMER PAINT (Solvent-based)  

CAMOUFLAGE PAINT

PRIMER PAINT (Water-based)

CAN HAND'LER

CATALYST

REBAR GREEN COATING

CHROME GALVANIZE

ROOF PAINT

CLEAR ACRYLIC COATINGS

FLAT MATTE CLEAR ACRYLIC

RUST PROOF PAINT (Solvent-based)

COLD GALVANIZING COMPOUND

RUST PROOF PAINT (Water-based)

COLD GALVANIZING COMPOUND (1/2 Pint)

SPRAY MATE™ ENAMELS

STAINLESS STEEL COATING

STIR-N-POUR (Single)

STIR-N-POUR (2-10 Display)

ENGINE PAINT

SUPREME RUST SHIELD PAINT

FLEET & FARM EQUIPMENT PAINT

THINNER (Acetone/Xylene - 494)

FLO GLO™ COATING

THINNER (Acetone/VM&P - 495)

GALVA BRIGHT

THINNER (VM&P/Xylene - 908)

HI-HEAT PAINT

THINNER (Xylene/Acetone - 909)

INDUSTRIAL SHOP PRIMER

TREE MARKING PAINT (Regular)

KLEER KOTE

TREE MARKING PAINT (Fluorescent)

MINE MARKING PAINT

TREE MARKING PAINT (Wet Coat)

POLYSHIELD® PROTECTIVE COAT

URETHANE VARNISH

POLYSHIELD® ROPE END SEALER

ZINC RICH GALVANIZE

Zinc Rich and Brite Galv provide superior corrosion-resistant coatings that act as both primer and top coat for iron, steel, and their welds. Both coatings repair hot-dip galvanizing that has been damaged by abrasion, scratching, cutting or welding.

Restores galvanized surfaces to the bright look of hot-dip
Performs at temperatures up to 400° F
Dries to a bright, shiny silver finish to provide protection and repair similar to hot dip
Stops rust and corrosion on any steel or iron surface
Outstanding weld through primer
Can be used as primer or top coat
Zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing
If surface is scratched or broken an electrochemical reaction called sacrificial anodization causes the zinc to sacrifice itself for the base metal’s protection
Meets performance requirements of ASTM A780-93A
65% pure zinc in dry film
Acceptable as a coating in federally inspected meat and poultry plants for application to structural surfaces or any surface where there is a possibility of incidental food contact
Dries to touch in just 10 minutes
Uses: Pipes, heavy equipment, fencing, wrought iron, highway guard rails, hand rails, welds, metal, bridges, storage tanks, corrugated meal buildings, transformers, television towers, signs and sign posts, railroad equipment, construction equipment and anywhere the bright look of hot-dipped surfaces are desired.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A durable, high-hide paint that offers the unique visual characteristics of true camouflage cover if blended in U.S. military color patterns.

Colors are exact matches to 595 Federal Specifications
Dries to a tough, hard finish that resists corrosion and abrasion
Will not chip or peel under harsh conditions
Provides visual characteristics of true camouflage cover
Superior quality, anti-corrosion paint
Performs at temperatures up to 300° F
Designed to U.S. Military Designated Field Coloring standards
High solids, fast drying formula
Uses: Ideal for military vehicle restoration when blended to U.S. military color patterns. Apply to metal or wood surfaces as top or final coat where an earth-toned finish is desired.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Easily transform your aerosol cans into a spray gun by snapping the Aervoe Can Hand'ler into the can rim.
Eliminates finger fatigue
Prevent accidental discharge with trigger lock
Easy to clean and reusable
Uses: With any standard can of spray paint, varnish, primers, cleaners, lubricants and insecticides.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Aervoe offers a quality catalyst for Aervoe bulk Fleet and Custom Equipment Paint and Rebar Green Epoxy Coating to achieve a harder more durable finish.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Repairs hot-dip galvanizing that has been damaged by abrasion. Cosmetically repairs both ferrous and non-ferrous surfaces.

Stops rust and corrosion on any iron or steel surface
Offers on-the-job application when hot-dip repair is necessary
Does not contain any lead, chromates, methylene chloride or fluorocarbon propellants
Restores galvanized surfaces to the bright look of hot-dip
Zinc fuses to metal substrates
Uses: Use on pipes, heavy equipment, highway guard rails, hand rails, welds, metal chain fences, bridges, storage tanks, corrugated metal buildings, transformers, television towers, signs and sign posts, railroad equipment, construction equipment, and anywhere the bright look of hot-dipped surfaces is desired.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Clear Acrylic Coating is made with non-yellowing, true clear acrylic resins that provide superior gloss retention over painted and non-painted surfaces.

Can be used to coat electrical components
Forms a flexible, long-lasting coating
Clear film preserves and protects against rust and corrosion
Fast drying; dries to touch in just 5 minutes
Seals porous surfaces and protects important documents
Non-yellowing formula
Superior gloss retention both indoors and outdoors
Tough protective coating will not flake, chip or peel
Uses: Metal, motors, machinery, tools, tool boxes, steel bars and railings, metal hoods, lamps, copper or brass bed frames and fixtures, electrical components, conduit, ducts, electrical equipment, pipelines and to seal chalk markings.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Clear Acrylic Coating is made with non-yellowing, true clear acrylic resins that provide superior gloss retention over painted and non-painted surfaces.

Can be used to coat electrical components
Forms a flexible, long-lasting coating
Clear film preserves and protects against rust and corrosion
Fast drying; dries to touch in just 5 minutes
Seals porous surfaces and protects important documents
Non-yellowing formula
Superior gloss retention both indoors and outdoors
Tough protective coating will not flake, chip or peel
Uses: Metal, motors, machinery, tools, tool boxes, steel bars and railings, metal hoods, lamps, copper or brass bed frames and fixtures, electrical components, conduit, ducts, electrical equipment, pipelines and to seal chalk markings.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Cold Galvanizing Compound provides corrosion protection to ferrous metal surfaces first, as a long-lived coating of practically pure zinc comparable to that obtained by galvanization, and second through sacrificial anodization.

93% zinc-rich coating bonds to iron and steel
Sacrificial anodization of zinc occurs when the surface is scratched or broken; zinc coating will corrode while continuing to protect the metal surface it covers
USDA Category 21 acceptable
Uses: Apply to welded joints, guard rails, bridges, metal chain fences, pipes, TV towers, refinery piping, heavy equipment, corrugated metal buildings, etc. Ideal for harsh industrial environments, such as aviation, marine, manufacturing and petroleum applications.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Cold Galvanizing Compound provides corrosion protection to ferrous metal surfaces first, as a long-lived coating of practically pure zinc comparable to that obtained by galvanization, and second through sacrificial anodization.

93% zinc-rich coating bonds to iron and steel
Sacrificial anodization of zinc occurs when the surface is scratched or broken; zinc coating will corrode while continuing to protect the metal surface it covers
USDA Category 21 acceptable
Uses: Apply to welded joints, guard rails, bridges, metal chain fences, pipes, TV towers, refinery piping, heavy equipment, corrugated metal buildings, etc. Ideal for harsh industrial environments, such as aviation, marine, manufacturing and petroleum applications.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This fast drying, heat resistant paint is specially formulated to keep engine surfaces from pitting and rusting while maintaining color and a high gloss finish.

Specially made for refinishing engines and transmissions
Withstands temperatures up to 400° F (249° C)
Fast drying acrylic enamels
Excellent adhesion prevents rust, pitting, peeling, and checking
Exact match to O.E.M. standards
Oil and gasoline resistant
Does not contain lead, CFCs, HCFCs or chlorinated solvents
Provides superior durability and fade resistance under a variety of harsh conditions
Designed to meet the demands of the professional engine rebuilder
Uses: Cast metal engine blocks, transmissions, pipes, radiators, farm and marine equipment, and other automotive and industrial equipment exposed to high temperatures.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Highest quality industrial finish is matched to O.E.M. color standards for maintenance of equipment, vehicles, farm equipment, and vending machines.
Outstanding hardness and durability
Provides very good resistance to corrosion, chemicals, gasoline, salt spray, and aliphatic solvents
Fast drying; dries to touch in 15 minutes
Non-yellowing formula with excellent color and high gloss retention
Exact match to O.E.M. standards for farm, vehicle, and lawn and garden equipment
Compounding and buffing are not required for a high gloss and deep luster finish
Increases elapsed time between repainting fleets
Enhance properties of bulk liquid with Aervoe catalyst
Finish comparable to original baked automotive finishes
Ideal for touch up or complete section refurbishing
White matches DuPont® color numbers 7331, 4774 and 817
Uses: Fleet vehicles and equipment, vending machines, construction equipment, steel, wood, metal, composition board, production equipment, automobiles, compressors,

Back

Prices Upon Request

To Account Holders

Via Email or Fax

FLO GLO™ is a fast-drying coating made up of fluorescent particles that delivers color four times brighter than other spray paints.

Available in an assortment of bright colors
Provides maximum visibility and safety; total "glo" effect is obtained under black lights
Increase visibility by up to four times; apply over white base coat for optimum brightness
Can be used for both interior or exterior applications
Attracts attention for advertising or warnings
Dries to touch in minutes, full cure in 24 hours
Uses: Metal, wood, concrete, steel bars, safety aisle marking, machinery, signs, posters, emergency and safety equipment, OSHA hazards, production equipment, furniture, hobby models, toys, bicycles, sleds, and fly fishing lures. Ideal for engineering and survey painting of wood, stakes, trees, buildings, and environmental study areas.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown's Galva Bright Premium is a restorative coating fortified with zinc to prevent rust and corrosion on ferrous metal surfaces.

zinc-rich formula for long lasting protection
Stops rust and corrosion on any iron or steel surface
Easy to use, can be applied with aerosol spray or brushed on
Fast drying formula will restore the bright look of hot-dipped surfaces
Ideal for aviation, marine, manufacturing, and petroleum applications
Uses: For cosmetic repair of welds, hand rail rims, highway guard rails, metal chain fences, pipes, TV towers, refinery piping, heavy equipment, corrugated metals buildings, and any other metal surface requiring the look of hot-dip galvanizing.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Hi-Heat Paint is a flame and heat-resistant coating uniquely formulated to produce a lasting finish that is resistant to surface temperatures reaching up to 1000°F.

Withstands temperatures up to 1000°F (538° C)
When cured properly, this fast drying paint provides a very hard, durable finish
Offers excellent corrosion resistance as well as interior and exterior durability
Designed for use on metal surfaces where excessive heat will cause regular paint to blister and crack, such as wood stoves and barbecues
Once cured, will not chip off, peel away, discolor or chalk
Designed specifically for use on metal surfaces subject to extreme heat
Uses: Engine manifolds, mufflers, incinerators, radiators, space heaters, barbecues and fireplaces, steam pipes, boilers, furnaces, and gasoline engines.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This low-cost, fast drying industrial shop primer is designed to cover any firm surface where an exact color match is not required.

Rapid dry time and durable finish meet the demands of steel fabrication shops where space limitations dictate quick coating and stacking times
Provides a smooth, highly pigmented surface for top coating with conventional alkyd and oil modified finishes
For use with or without a topcoat whenever specification material is not required; slight color variation from batch to batch is typical
Does not contain heavy metals such as lead, chromium, mercury and cadmium
Dry film thickness of 2.5 mils can be achieved in one coat
Recoat times are not critical
Uses: As a primer coat, or single coat for structural steel or wood in non-chemical exposures, where fast handling or fast top coating times are required. This product should not be used as a topcoat if color matching is required.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Kleer Kote covers and seals with a lustrous smooth finish to provide superior gloss retention over painted and non-painted surfaces.

Forms a flexible, long-lasting coating
Clear film preserves and protects against rust and corrosion
Non-yellowing formula
Superior gloss retention both indoors and outdoors
Tough protective coating will not flake, chip or peel
Uses: Metal, motors, machinery parts, tools, tool boxes, steel bars and railings, metal hoods, lamps, copper or brass bed frames and fixtures, conduit, ducts, pipelines and to seal chalk markings.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Aervoe’s upright water-based marking paint is a highly pigmented, durable paint designed specifically for overhead marking.

True water-based formula meets NFPA 30B Level I for warehouse storage
Sprays upright with or without cap on.
May be applied by hand or in Aervoe’s #244 Spot Marker
VOC compliant
Does not contain ozone depleting substances, lead, CFCs, chromates or chlorinated solvents
Non-flammable, low flash, low odor
Mark is water resistant after dry
Adhesion is equal to that of Aervoe solvent-based formulas
Clean up over spray in first 5 minutes with soap and water
Non-clogging; contents empties completely
Fast drying, highly visible colors
Uses: Overhead marking in mines, on bridges, building construction or any application requiring overhead marking.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Available in aerosol and liquid form, this tough, flexible coating is applied to almost any surface by spraying or dipping to protect, seal, cushion, and weatherproof for years.

Cushions the grip surface and helps to inhibit rust and corrosion for years
Will not crack or chip
Color codes items for safety and reduces noise and shock
Seals out salts, acids and other contaminants
Clear coating may be used to shatterproof glass or protect blueprints and maps
Use as non-skid coating to provide safety traction
Uses: Excellent protective coating for all wood and metal surfaces, both indoors and outdoors. Ideal for coating frayed rope ends, glass containers and beakers, windows, hand tool comfort gripping and color-coding, metal rope and meshing, metal stair pads, screw hooks, papers, gauges, cloth or clothing. Use #411 Clear to protect maps, blueprints, plans and flight charts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Rope End Sealer is a tough, flexible rubber dip coating that protects and seals the end of ropes, twine, string, and fabric to prevent fraying.

Coating remains supple; will not crack or chip
Available in four vibrant colors
Prevents rope ends from fraying
Uses: Excellent for all rope material types, including metal, synthetics (nylon, polyester), cotton, and hemp.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

High quality, non-lifting primer coatings for use on surfaces where good adhesion is needed before top/finish coat.

Fast-drying; dries to touch in 10 minutes
Tough, dependable primer coating
Provides adhesion to non-painted surfaces to achieve maximum cohesion of final top coat
Enhances the quality of any finish
Bonds extremely well to bare metal surfaces, preventing rust and corrosion
Fills in grain and surface imperfections when used on wood
Use as preparatory measure whenever a quality finish is desired
Uses: Metal or wood surfaces, including machinery, railings, electrical motors, presses, shop equipment, shelving, compressors, generators, bicycles, appliances, ladders, furniture, cabinets and automotive body parts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

High quality, non-lifting water-based primer coatings for use on surfaces where good adhesion is needed before top/finish coat.

Tough, dependable primer coatings
Provides adhesion to non-painted surfaces to achieve maximum cohesion of final top coat
Bonds extremely well to bare metal surfaces, preventing rust and corrosion
Fills in grain and surface imperfections when used on wood
Use as preparatory measure whenever a quality finish is desired
Uses: Metal or wood surfaces, including machinery, railings, electrical motors, presses, shop equipment, shelving, compressors, generators, bicycles, appliances, ladders, furniture, cabinets and automotive body parts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A high performance, single system epoxy coating that is specially designed for touch up or on site initial coating to protect rebars and other metal and steel surfaces.

A true epoxy, single system coating
Prevents rust and the resulting stains when applied to rebar before setting in concrete
Enhance properties of bulk liquid with Aervoe catalyst
Meets ASTM D3963 performance specifications with bulk catalyzed coating
A non-yellowing formula that has excellent color retention
Provides a rustproof finish to keep rust stains from appearing in finished concrete
Adheres to all surfaces with very good resistance to corrosion, chemicals, gasoline, and abrasion
Prevents oxidation with touch up of sheared ends, cuts and other exposed areas
Performs at temperatures up to 300° F
Tough, durable finish
Uses: Rebar, metal, steel, and metal support reinforcement beams.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This high quality enamel coating is formulated for exterior use on roofing accessories. This paint provides long term protection against rust, corrosion and discoloration on metal and other roofing accessory materials.

Fast drying industrial grade enamel
Provides a professional coating on surfaces where brush application may be difficult
Excellent adhesion to all metal, plastic, vinyl, wood and masonry surfaces
Resistant to water, snow, UV exposure and other hard outdoor conditions
Protects against rust, corrosion and discoloration
Easy to apply
Superior durability, durable color fastness, high hide coverage
Matched to O.E.M. color standards
Uses: Specifically designed for roof vents, flashing, valleys and other metal or plastic roofing accessories. Apply to metal, plastic vinyl, wood, concrete and masonry. Do not use on asphalt shingle surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

High-performance Rustproof solvent-based formulation withstands corrosion and exposure to mild and moderate conditions* while maintaining high gloss levels. Wide color selection includes OSHA safety, HVAC, commercial and selected factory equipment touch up colors.
High gloss, high solids formula
Ideal for projects both indoors or outdoors
Resistant to mild and moderate environments including intermittent exposure to water, salt spray and temperatures up to 300°F (149°C)
Formulated specifically for a variety of industrial applications
Can be applied directly over rust with minor surface preparation
Tough, protective coating will not chip or peel
Ideal for equipment touch up and OEM production applications
Solvent-based aerosol formula dries to touch in just 15 minutes
Provides excellent hiding characteristics with smooth, even coverage
VOC compliant; does not contain lead or ozone depleting substances
Not recommended for water immersion services
Uses: Metal, wood and other commons surfaces including non-porous plaster. Machinery, motors, tools, cabinets, toolboxes, steel bars and railings, pipelines, drums, conduit, ducts, furniture, electrical equipment. Ideal for marking hazard areas and color coding steel and lumber.

*ENVIRONMENTAL CONSIDERATIONS

MILD ENVIRONMENTS: Normal outdoor conditions, mild industrial fumes, with normal humidity, some mildew and mold conditions. MODERATE ENVIRONMENTS: Mild chemical spills and frequent fumes, with occasional product spills and or chemical cleaning. Some high humidity, moisture, mildew, and mold present. SEVERE ENVIRONMENTS: High frequency of fumes, spills of strong acids, alkalis, solvents and other chemicals, Frequent product spills and chemical cleaning. High humidity and moisture.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Rustproof water-based formulation provides exceptional advantages for indoor applications on a variety of surfaces. Color selection includes OSHA safety and HVAC refrigerant colors.
High gloss, high solids formula
Ideal for projects both indoors or outdoors
Resistant to mild and moderate environments* including intermittent exposure to water, and salt spray
Formulated specifically for a variety of industrial applications
Can be applied directly over rust with minor surface preparation
Tough, protective coating will not chip or peel once dry
Out performs the competitors under the toughest salt spray corrosion tests
Provides excellent hiding characteristics with smooth, even coverage
Low odor
VOC compliant
Not recommended for water immersion services
Uses: Metal, wood and other commons surfaces including non-porous plaster. Machinery, motors, tools, cabinets, toolboxes, steel bars and railings, pipelines, drums, conduit, ducts, furniture, electrical equipment. Ideal for marking hazard areas and color coding steel and lumber.

*ENVIRONMENTAL CONSIDERATIONS

MILD ENVIRONMENTS: Normal outdoor conditions, mild industrial fumes, with normal humidity, some mildew and mold conditions. MODERATE ENVIRONMENTS: Mild chemical spills and frequent fumes, with occasional product spills and or chemical cleaning. Some high humidity, moisture, mildew, and mold present. SEVERE ENVIRONMENTS: High frequency of fumes, spills of strong acids, alkalis, solvents and other chemicals, Frequent product spills and chemical cleaning. High humidity and moisture.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Spray Mate™ Enamels are quick drying, economical enamels for a tough, durable finish on most interior/exterior surfaces.
Fast drying, economical paints
Can be used on a variety of surfaces; interior and exterior
Ideal for most paint and touch up projects
Uses: Can be used on wood, metal, aluminum, wrought iron, hard plastic, drywall, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Steel Renew Stainless Steel Coating provides optimum resistance to weather, abrasion and corrosion to metal, chrome, ceramic, and copper surfaces.

Contains 100% 316L stainless steel pigment
Available in both aerosol (Polyurethane) and bulk (two component epoxy)
Creates a hard, metallic finish that is ideal for metal parts, equipment, and machinery
Provides a hard, non toxic, metallic finish that protects a variety of surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high pressure wash downs
Aerosol dries to a satin sheen in just 15 minutes
Ideal for covering discoloration in weld areas
Acceptable as a coating in federally inspected meat and poultry plants for application to structural surfaces or any surface where there is a possibility of incidental food contact
Does not contain lead
True rust protection using real stainless steel
Performs at temperatures up to 350° F
Uses: Structural steel, food processing and packaging equipment, metal parts, industrial equipment, tools, trailers, tanks, towers, exhaust pipes, mufflers, radiators, production equipment, steam pipes, refrigeration equipment, production equipment, engines, furnaces, plumbing fixtures, chemical processing equipment, wood, brick, plaster, tile, glass, masonry, porcelain, fiberglass and masonite.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This plastic cover and stirring device fits onto any standard, round gallon can. It seals the paint inside the can with the airtight lid and eliminates messy stirring sticks.

Mixes paint thorough without the messy spills
Keeps paint fresh
Drips are eliminated with pouring spout
Eliminates messy stirring sticks, dried out paint, and tacky lids
Washable and reusable
Resists petrochemical solvents and helps contain fumes
Uses: Mixing paints in all standard round gallon cans.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This plastic cover and stirring device fits onto any standard, round gallon can. It seals the paint inside the can with the airtight lid and eliminates messy stirring sticks.

Mixes paint thorough without the messy spills
Keeps paint fresh
Drips are eliminated with pouring spout
Eliminates messy stirring sticks, dried out paint, and tacky lids
Washable and reusable
Resists petrochemical solvents and helps contain fumes
Uses: Mixing paints in all standard round gallon cans.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Supreme Rust Shield coating is designed to provide superior appearance and color retention under mild or moderate conditions*.
Fast drying. Dries to touch in 10 minutes; dries to handle in 30 minutes
High gloss, full hide coverage in one coat, with or without a primer
Superior gloss and color retention
Durable finish will not crack, chip or peel
Provides excellent interior and exterior durability
Ideal for metal parts fabrication, finish coat, and maintenance
Performs well at temperatures up to 300° F (149° C)
Maintains superior gloss and color retention under exposure to harsh conditions such as salt spray, water, chemicals and UV exposure
Wide color selection including five OSHA safety colors, HVAC, and select factory equipment touch up colors
USDA (Click on USDA link for category descriptions)
Not recommended for w