|
Mold Releases are a high
quality line of aerosol, silicone, non-silicone, food-grade, and
paintable mold releases that are non-flammable and
non-chlorinated. All are packaged with the Spray-Any-Way valve
to accommodate application in any position. Crown Ready
Releases provide excellent performance and are economically
priced. A NON-FLAMMABLE, CHLORINATED line of releases that
were formulated to fit a variety of needs. #3270 Epoxy Ready
Release is the only exception. Crown Reliable Releases are low
cost, FLAMMABLE and NON-CHLORINATED mold releases with low toxicity
and environmentally friendly attributes. Product #3052
Lecithin contains 141b - see special note.
NOTE: HCFC-141b raw
material production has been curtailed in the USA effective
12/31/02. Sell through of existing stocks are allowed in
packaged products. It is anticipated that those products
identified as containing 141b (#3052 Lecithin Mold Release), should
be available through 2003. There may however, be volatile
changes in pricing as the market conditions evolve. Users of
these products are strongly advised to evaluate alternatives during
the next 12 months as Aervoe does not plan to offer these items past
12/31/03. Products containing 141b are prohibited for sale in
Canada effective immediately.
Mold Releases
|
This general-purpose industrial strength mold release
contains 1% silicone fluid that is ideal for hot or cold
molds.
Contains 1% silicone
Ideal for hot or cold molds
Odorless and fast evaporating
Heat stable at
temperatures up to 550ºF (288ºC)
Spray-Any-Way valve
allows product to be applied in either upright or upside down
position
Non-staining, non-corrosive formula
Does not
contain ozone depleting substances
Uses: Plastic injection
molders, compression molders, extruders, and foundries, blow
molders, investment castings, and candle molders. Recommended
for use on A.B.S. resins, acrylics, wax, rubber, polyesters,
cellulosics and polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
This general-purpose industrial strength mold release
contains a light silicone fluid that is ideal for hot or cold
molds.
Contains 2% silicone
Ideal for hot or cold molds
Odorless and fast evaporating
Heat stable at
temperatures up to 550ºF (288ºC)
Meets FDA regulation
21CFR181.28 as a release agent in the manufacture of food
contacting materials
Spray-Any-Way valve allows product to
be applied in either upright or upside down position
Non-staining, non-corrosive formula
Does not contain
ozone depleting substances
Uses: Plastic injection
molders, compression molders, extruders, and foundries, blow
molders, investment castings, and candle molders. Recommended
for use on A.B.S. resins, acrylics, wax, rubber, polyesters,
cellulosics and polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Food Grade Silicone Mold Release is an effective release
agent typically used for foundries, compression molders,
investment castings, extruders, blow molders, candle molders,
and plastic injection molders.
Contains 3% silicone
USDA H-1 (Click on USDA link for
category descriptions)
Meets FDA regulation 21CFR181.28 as
a release agent in the manufacture of food contacting
materials
Ideal for hot or cold molds
Non-staining,
non-corrosive formula
Heat stable at temperatures between
40º F and 550º F (4º C and 288º C)
Low flash
Spray-Any-Way valve allows product to be applied in either
upright or upside down position
Safe on rubber, wood and
most plastics
Does not contain ozone-depleting substances
Uses: Plastic injection molders, compression molders,
extruders, and foundries, blow molders, investment castings,
and candle molders. Recommended for use on A.B.S. resins,
acrylics, wax, rubber, polyesters, cellulosics and
polystyrenes. Provides excellent lubricating properties for
guides, saws, conveyors, and rollers on packaging
equipment.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
This heavy-duty industrial strength mold release is a
high-viscosity silicone that provides maximum releases under
the most severe molding conditions.
Contains 4% silicone
High purity formulation minimizes
sticking, glazing, crazing, spotting and other causes for
rejects
Low odor, fast evaporating
Heat stable up to
550º F (288º C)
Low Flash, non-corrosive
Spray-Any-Way
valve allows product to be applied in either upright or upside
down position
Will not interfere with post finishing
processes such as painting, stenciling, hot stamping, gluing,
or other forms of decorating
Compatible with most moldable
resins, elastomer compounds, rubber, wax, and plastic
Does
not contain ozone depleting substances
Uses: Injection
molding and hot or cold molding processes for rubber,
polystyrenes, polyurethane foams, plastic, metal castings and
elastomeric materials.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Specially formulated silicone fluids that provide excellent
release properties that are ideal for all types of plastics
where decorating is required after molding.
Contains 2% silicone
Odorless, non-staining,
non-corrosive formula
Heat stable up to 550º F
Long
lasting, anti-stick film
Allows for multiple part releases
per application
Low flash
Increases molding efficiency
Does not contain ozone depleting substances
Spray-Any-Way valve allows product to be applied in either
upright or upside down position
Ideal for injection
molding and hot or cold molding processes
Compatible with
most moldable resins, elastomer compounds, rubber, wax, and
plastic
Uses: Injection molding and hot or cold molding
processes for rubber, polystyrenes, polyurethane foams,
plastic, metal castings and elastomeric materials.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
This economical, non-silicone release agent provides
excellent anti-stick properties that leaves a thin, dry film
which doesn’t transfer to finished parts.
Non-silicone formula; made with P.T.F.E.
Provides
multiple releases per application
Will not harm most
plastics or attack rubber, paints, or metals
Compatible
with most urethanes and styrene’s, moldable resins and
elastomeric compounds
Spray-Any-Way valve allows product
to be applied in either upright or upside down position
Does not contain ozone depleting substances
Will not
interfere with post-finishing operations; parts can be
painted, stenciled, hot stamped, glued, plated, or otherwise
decorated
Heat stable up to 575º F (302º C)
Meets
MIL-L-60326 MU Type II performance requirements
Uses:
Nylon, rubber, foam, some plastics, metal, phenolic resins,
filament windings, epoxy potting and encapsulating,
polypropylenes, polystyrenes and polyurethanes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
A high-grade, finely milled, dry zinc powder release agent
that controls shot spots, gobbing, and reduces rejected parts.
Heat stable at temperatures up to 450º F (232º C)
Repels dust and increases molding efficiency
Ideal for
thermosetting and thermoplastic applications
Will not
interfere with post-finishing operations; parts can be
painted, stenciled, hot stamped, glued, plated, or otherwise
decorated
Excellent for start up operations
Does not
contain ozone depleting substances
Spray-Any-Way valve
allows product to be applied in either upright or upside down
position
Will not harm most plastics
Does not contain
ozone depleting substances
Uses: Clear styrene’s and
acrylics, reflex lenses, polycarbonates, most plastic molds,
polystyrenes, molding ceramics and polypropylenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Paintable Lecithin Mold Release is designed for quick,
clean releases on thermosets and thermoplastics. Ideal for all
types of plastics where decorating is required after molding.
Will not interfere with post-finishing opeations; parts can
be painted, stenciled, hot stamped, glued, plated, or
otherwise decorated
Resists crazing and stress cracking
Will not mar clear polyethylene, polystyrene, or other
plastics
Meets FDA regulations
Low flash
Provides
quick, clean releases on thermosets and thermoplastics
Spray-Any-Way valve allows product to be applied in either
upright or upside down position
Uses: Plastic wrap cutting
equipment, compression molding, gaskets and seals for tank
closures, toy and furniture manufacturing, urethanes, epoxy
resins, polyesters and polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax
|
Mold Specialties
|
Protect stored tools and dies from moisture during storage.
Ideal for long-term storage or long-distance shipments.
Easy to remove
Absorbs moisture and neutralizes acid
formed by corrosive atmospheric conditions
Delivers a
greasy, elastic film that won't harden or crack with age
Provides long-term protection for indoor or outdoor
storage
Uses: Good for chucks, set-up jigs, tools, stored
metals molds and dies, and seldom-used parts.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Provides maximum storage protection for valuable tools,
jigs, hardware, molds, dies, and bare metal surfaces.
Penetrates metal pores and spreads over entire surface to seal
out air and moisture.
Translucent waxy film that protects against dust, grime,
and moisture
Neutralizes fingerprints
Ideal for
short-or long-term storage
Uses: For protection of bare
metal surfaces, molds, dies, tools, jigs, etc.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
A solvent-based spray cleaner for general cleaning of metal
molds.
For in-place cleaning of all metal molds, or for superior
clean-up prior to storage
Removes all grease, oil, and
other soils that cause molding imperfections
Uses: On
metal molds, dies, pins, jigs, machinery, and mechanical
equipment.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
This paintable lecithin release is designed for quick,
clean releases on thermosets and thermoplastics. Will not
interfere with post-finishing operations; parts can be
painted, stenciled, glued, hot stamped, plated or otherwise
decorated.
Heat stable up to 500°F (260°C)
Resists crazing and
stress cracking
Will not mar clear polyethylene,
polystyrene, or other plastics
Meets FDA regulations
Uses: Plastic wrap cutting equipment, compression molding,
gaskets and seals for tank closures, toy and furniture
manufacturing, urethanes, epoxy resins, polyesters and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax
|
Reliable Mold Releases
|
An industrial strength release agent that is economically
priced to help resist costly breakdowns.
Heat stable at temperatures up to 550°F (288°C)
Increases molding efficiencies
Allows for multiple
parts releases per application
Ideal for hot or cold
molding processes
Non-staining and non-corrosive
Low
toxicity
Uses: Plastic injection molders, compression
molders, extruders and foundries, blow molders, investment
castings and candle molders. Recommended for use on A.B.S.
resins, acrylics, wax, rubber, polyesters, cellulosics and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
An industrial strength release agent that is economically
priced to help resist costly breakdowns.
Heat stable at temperatures up to 550°F (288°C)
Increases molding efficiencies
Allows for multiple
parts releases per application
Ideal for hot or cold
molding processes
Non-staining and non-corrosive
Low
toxicity
Uses: Plastic injection molders, compression
molders, extruders and foundries, blow molders, investment
castings and candle molders. Recommended for use on A.B.S.
resins, acrylics, wax, rubber, polyesters, cellulosics and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
This paintable lecithin release is designed for quick,
clean releases on thermosets and thermoplastics. Will not
interfere with post-finishing operations; parts can be
painted, stenciled, glued, hot stamped, plated or otherwise
decorated.
Heat stable up to 500°F (260°C)
Resists crazing and
stress cracking
Will not mar clear polyethylene,
polystyrene, or other plastics
Meets FDA regulations
Uses: Plastic wrap cutting equipment, compression molding,
gaskets and seals for tank closures, toy and furniture
manufacturing, urethanes, epoxy resins, polyesters and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Specially formulated silicone fluid that provides excellent
release properties that is ideal for all types of plastics
where decorating is required immediately after molding.
Heat stable up to 550°F (288°C)
Odorless, non-staining,
non-corrosive formula
Allows for multiple part releases
per application
Parts can be readily decorated with all
types of solvent-based paints, enamels, and lacquers
Increases molding efficiencies
Ideal for injection
molding and hot or cold molding processes
Compatible with
most moldable resins, elastomer compounds, rubber, wax, and
plastic
Uses: Hot or cold molding processes for rubber,
polystyrenes, polyurethane foams, plastic, metal castings, and
elastomeric materials.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Economically prices release agents that meet the needs of
compression molders that use all types of epoxy and phenolic
resins.
Does not contain silicone
Ideal for manufacturers of
flexible and rigid polyurethane
Contains wax
Easily
removed with industrial washers
Uses: Epoxy molding,
polyurethane, and phenolics lamination and molding.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
Food-safe mold releases that are ideal for all
polypropylene and polyurethane moldings, including toys, food
containers, closures, etc.
USDA H-1
Heat stable at temperatures up to 550°F
(288°C)
Meets FDA regulation 21CFR181.28 as a release
agent in the manufacture of food contacting materials
Ideal for hot or cold molds
Non-staining,
non-corrosive formula
Safe on rubber, wood, and most
plastics
Only rinsing required prior to post decorating
Uses: Plastic injection molders, compression molders,
extruders and foundries, blow molders, investment castings,
and candle molders. Provides excellent lubricating properties
for guides, saws, conveyors, and rollers on packaging
equipment.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax
|
|
