Adhesives 

Cleaners 

Coatings 

Lubricants-Penetrants 

Non-Destructive Test Systems 

EPS FOAM/CONCRETE ADHESIVE 

GENERAL PURPOSE ADHESIVE

HEAVY DUTY ADHESIVE

SPRAY CONTACT ADHESIVE

Our unique pressure sensitive, upside down spray adhesive provides fast tacking and extra-strong bonding or laminating of expanded polystyrene (EPS).
Product is flexible for adhesion to smooth or rough substrates
Quick set up allows for faster construction times
Binds both porous and nonporous surfaces
Will not damage EPS
Provides temporary light-duty performance or permanent bonds in heavy-duty applications
Resistant to UV, heat, and water damage
Stain free, mild odor formulation
Uses: Can be used throughout general industry and construction for bonding EPS to concrete and other EPS surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

General Purpose Adhesive provides holding power on most surfaces, rough or smooth.

Fast drying, just spray and stick
Repositionable
Bonds both porous and non-porous surfaces
Conical mist spray pattern
Adheres to paper, cardboard, wood, or metal
Uses: Ideal for light production work, especially the temporary pinning alignment of parts for final assembly.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Heavy Duty Adhesive provides holding power on most surfaces, rough or smooth.

Objects are repositionable
Conical mist spray pattern
Fast drying, just spray and stick
Bonds both porous and non-porous surfaces
Uses: Ideal for light production work, especially the temporary pinning alignment of parts for final assembly. Adheres to paper, cardboard, wood, or metals.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Spray Contact Adhesive will permanently affix flexible materials such as, laminates, many plastics, metal, and wood.

Bonds in one to three minutes
Withstands temperatures up to 200°F (84°C)
Uses: For auto trim applications, van conversions, cabinet shops, and manufacturing assembly operations. Not recommended for use on vinyl.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Contact Cleaners

CONTACT CLEANER (F)

CONTACT CLEANER (NF)

ELECT. COMPONENT CLEANER (NF)

OFF LINE CONTACT CLEANER

Degreasers

CLEANER/DEGREASER

CLEANER/DEGREASER (F)

EMULSIFIABLE DEGREASER

HEAVY DUTY CLEANER/DEGREASER

NU-SAFE® CLEANER/DEGREASER

SAFETY SOLVENT (NF)

SAFETY SOLVENT (NF) H.D. - High Delivery

SUPREME KLEEN CLEANER/DEGREASER

Miscellaneous Cleaners

ALL PURPOSE CLEANER

BRAKE CLEANER

CARB & CHOKE CLEANER

DUSTAIR™

FOAM KLEAN™

STAINLESS STEEL CLEANER

GLASS & SURFACE CLEANER

HAND-Y TOWELS

This fast penetrating cleaner is highly refined and designed for use on high-tech electronic hardware and PCBs and PWBs. It is safe for use on metal, plastics, rubber, and glass surfaces. This product should not be used on energized equipment or equipment in operation.
Quick, penetrating action
Leaves no residue
Effectively removes grease, oil, dirt, and other contaminants
Does not contain CFCs, HCFC, or chlorinated solvents
Includes extension tube for precision application in hard to reach areas
Displaces water and moisture
Trigger spray action assures complete saturation
Unique wetting action cleans the finest of instruments, contacts, relays, precision mechanical or electrical solenoids, and other delicate hardware
Uses: Electrical components, connectors, contacts, magnetic tape heads, semiconductor assemblies, precision instruments, office equipment, printed circuits, computer components, relays and controls, telephone equipment, typewriters, and TV tuners.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This no flash, fast penetrating, high-pressure cleaner is designed for precision cleaning on electronic hardware and printed circuit boards.
Effectively removes grease, oil, dirt, and other contaminants
No flash cleaner
Dielectric strength 5.3kV/mm
USDA K-2 (Click on USDA link for category descriptions)
Quick penetrating action
Evaporates quickly without leaving a film or residue
Safe on most plastics, coatings, or paints
Does not contain CFCs, HCFCs, or chlorinated solvents
Includes extension tube for precision application in hard to reach areas
Low surface tension allows for easy penetration and eliminates the need for disassembly of component parts
Restores and maintains original electronic values and constants
Uses: Electrical contacts and terminals, magnetic tape heads, semiconductor assemblies, precision instruments, circuit breakers, printed circuits, switches, relays and controls, vacuum tube parts, mechanical or electrical solenoids, telephone equipment, motors, sensors, and televisions.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Electronic Component Cleaner is a no-flash, spray cleaner that flushes away contaminates and film.

Fast evaporation
Does not leave a film or residue
Can also be used as a flux remover
Uses: For electrical components, relays, circuit breakers and boards, switches, contacts, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A fast-evaporating, low-odor cleaner for off-line equipment maintenance.

Does not leave a film or residue
Safe on most plastics and metals
Does not contain CFCs, HCFCs, or chlorinated solvents
Uses: To be use don out-of-service electronic components. For relays, terminals, switches, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Cleaner/Degreaser is a dilutable liquid concentrate developed to meet a variety of applications and surfaces.

USDA C-1
Non-flammable
Non-butyl, biodegradable concentrate
Uses: To clean grills, driveways, floors, igloos, fiberglass, vinyl, glass, lights, tile, mirrors, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This fast-drying, industrial strength solvent is inexpensive and ideal for cleaning and degreasing. It removes grease, oil, wax, adhesives, and other contaminants without leaving a residue.
High-pressure spray action combined
Unique wetting action, penetrates and degreases in inaccessible cracks and crevices
Reduces failures and helps to increase equipment life by eliminating faulty operation of dirty moving parts
Fast-acting solvent penetrates easily, evaporates quickly, leaves no residue
Can be applied while mechanical parts are operating
Non-corrosive, non-conductive formula displaces moisture
High dielectric strength of 33kV/mm
Does not contain CFCs, HCFCs, or chlorinated solvents
Includes extension tube for precision application in hard to reach areas
USDA K-1 (Click on USDA link for category descriptions)
Uses: Motors, tools, machinery, metal parts, mechanical equipment, air conditioners, aircraft parts, automotive parts, bearings, chains, packaging machinery, compressors, generators, portable tools, office machinery, pumps, mechanical brakes and clutches, relays, gears, cables, locks, sporting equipment, solenoids, and more.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Emulsifiable Degreaser is a spray cleaner that rinses off with water. Formulated to remove grease, grime, tar, and oil from machinery.

Sprays on, washes off
Removes grease and oil
Acts like a solvent- or water-based cleaner
Uses: Great for engines, motors, generators, floors, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Heavy Duty Cleaner/Degreaser is an effective heavy duty cleaner that is safe on most plastics and has a light citrus scent.

Does not leave a residue
Wipes off without rinsing
Does not contain CFCs, HCFCs, or chlorinated solvents
Uses: Removes grease and grime from alternators, pulleys, chains, brakes, engines, forklifts, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A fast-acting, heavy duty cleaner and degreaser with deep penetrating spray action.

Non-conductive
Does not leave a residue
Flushes away dirt and grease
Flash point above 140°F/60°C (T.C.C.)
Uses: Brakes, chains, bearings, gears, forklifts, engines, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This quick drying, non-flammable product removes grease deposits, oil, metallic particles, carbon dust, and other dangerous materials.

Prevents costly flash-overs
Clean warm motors in place
Provides consistent cleaning power
Non-flammable, non-corrosive formula
Ideal fro removing spots and fingerprints
Fast evaporation; does not leave residues
Uses: Safe for cleaning electric motors, lathes, mining equipment, grease fittings, molds, switches, generators, relays, brake linings, rheostats, and fuse holders.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

400 Safety Solvent HD effectively removes oil, grease, wax, dirt, and moisture. The high-delivery (HD) spray, combined with its unique wetting action penetrates inaccessible areas, effectively flushing away contaminants without leaving a residue.
No flash formula
Can be applied while mechanical parts are operating
High dielectric strength of 36kV/mm
Non-corrosive, non-conductive formula displaces moisture
Does not contain CFCs, HCFCs, or chlorinated solvents
Includes extension tube for precision application in hard to reach areas
Reduces failures and helps to increase equipment life by eliminating faulty operation of dirty moving parts
Uses: Chains, motors, electrical boxes, aircraft parts, machinery, automotive parts, tools, mechanical brakes and clutches, relays, cables, locks, gears, portable tools, radar equipment, generators, bearings, compressors, switch gears, office machinery, pumps, mechanical brakes and clutches, and more.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Supreme Kleen Cleaner/Degreaser is a biodegradable concentrate that contains butyl.

USDA C-1
Non-flammable, non-corrosive
Does not contain chlorinated solvents
Strips wax
Uses: Clean grease and grim from grills, driveways, floors, tubs, fiberglass, vinyl, lights, tile, mirrors, etc. See label for dilution chart.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown All Purpose Cleaner is a water and ammonia based cleaner that provides a low foaming action cleaner for breaking up grime.

Cleans and polishes
Cuts through grease
Excellent on granite surfaces
Uses: For hard to clean spots on wood, metal, tile, porcelain, plastic, chrome, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This non-corrosive degreaser is effective in removing oil, grease, wax, dirt, and moisture from brake drums, linings, and pads.
Dries in less than 2 minutes
High-pressure action and unique wetting properties degreases and penetrates into inaccessible areas
Includes extension tube for precision application in hard to reach areas
Stops annoying break squeal
Reduces airborne asbestos dust
Keeps brake shoe pads at top level of performance
Does not contain CFCs, HCFCs, or chlorinated solvents
Effectively removes oil, grease, wax, dirt, and moisture
Uses: Drum and disk-type brakes. Can also be used for cleaning chains, gears, bearings, clutches, U-joints, and other areas where grease and oil have accumulated.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Carb & Choke Cleaner is a fast-acting blend of solvents that loosens and dissolves grease, carbon, dirt, varnish build-up, and gumming to maximize carburetor performance.
Eliminates rough idling, stalling, engine run-on, and starting hesitation
Quick and easy to use, fast drying, and leaves nor film or residue
Will not harm catalytic converters or oxygen sensors
Cleans heat risers by dissolving buildup around shaft
Spray around housing and block to remove grease and dirt buildup
Does not contain CFC’s, HCFC’s, or chlorinated solvents
Removes varnish build-up
Maximizes carburetor performance
Includes extension tube for precision application in hard to reach areas
Uses: PVC valves, automatic chokes, carburetor components, and crankcase breather elements, exhaust gas recycling valves (ERGs) and intake parts. Can be used in any carburetor or fuel injected gasoline engine.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

DustAir™ is a pure, non-CFC controlled air source that removes dust and airborne contaminants from delicate instruments without scratching the surface.
High-delivery trigger spray action
Includes extension tube for precision application in hard to reach areas
Non-abrasive
Safe for use on plastics
Safe for use on energized equipment
Effectively removes microscopic particles of lint, ferrous oxide, and other contaminants
Ideal for use on delicate components and instruments where residual entrapment could be a problem
Dirt, dust, pollen, and other debris are forcefully dislodged from delicate instruments
Uses: Electronics, laboratory equipment, data processing and optical, precision mechanical parts, person computers, electrical circuitry, and photographic equipment. Available in two convenient aerosol sizes.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A highly effective cleaner and disinfectant that cuts through dirt and eliminates germs on a variety of surfaces. Stands up to the toughest industrial and commercial cleaning demands.
E.P.A. registered to kill staphylococcus, salmonella, and pseudomonos
USDA C-1 (Click on USDA link for category descriptions)
All-purpose cleaner that cuts through dirt and grime with ease
Cleans and deodorizes in an easy to use aerosol can
Safe for use on metal, wood and laminated surfaces, porcelain, vinyl, leather, and glass
Cleans spots from synthetic carpets
Non-abrasive
Uses: Maintenance cleaning and disinfecting of bathtubs, sinks, shower stalls, and countertops in hospitals, restaurants, airports, office buildings, and factories. Safe on metal, glass, laminated surfaces, porcelain, vinyl, wood, linoleum and tile.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This industrial cleaner is effective on a variety of surfaces, but has been specifically formulated to clean and polish stainless steel, chrome, architectural aluminum, and laminated plastic surfaces.
Wipes off to a bright and sparkling, streak-free finish
Removes dirt, grease, fingerprints, road film, and grime
Will not scratch or harm glass, Plexiglas, or other plastic materials
USDA C-1 (Click on USDA link for category descriptions)
Does not leave a film and will not harm painted surfaces
Retards fogging
Cuts through greasy residue and factory film
Uses: Stainless steel, chrome, bumpers, glass and baked enamel objects, auto windshields, porcelain, vinyl surfaces, Plexiglas, laminated surfaces, countertops, tiles, safety glass, and showcases.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This industrial glass and surface cleaner is a fast acting foam that cuts through dirt, grease, and grime to clean a variety of surfaces.
Wipes off to a bright and sparkling, streak-free finish
Removes dirt, grease, fingerprints, road film, and grime
Will not scratch or harm glass, Plexiglas, or other plastic materials
USDA C-1 (Click on USDA link for category descriptions)
Does not leave a film and will not harm painted surfaces
Retards fogging
Cuts through greasy residue and factory film
Uses: Glass and baked enamel objects, auto windshields, porcelain, vinyl surfaces, Plexiglas, laminated surfaces, countertops, tiles, stainless steel, chrome, bumpers, safety glass, and showcases.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Hand-y Towels are pre-moistened cleaning towels in a handy flip-top tub dispenser.

Lint free
Quick drying
Fresh citrus scent
No need for water; no rinsing required
Uses: Removes tar, heavy greases, oils, wax, inks, lubricants, adhesives, dirt, and grime.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

ANTI-SEIZE COMPOUND 

ANTI-SEIZE (Copper)

ANTI-SEIZE (Food Grade)

ANTI-SEIZE (Nickel)

ANTI-STATIC COMPOUND

BATTERY TERMINAL COATING

CORROSION SUPPRESSANT 101

DRIVE BELT DRESSING

DRIVE BELT GRIP

INSULATING EPOXY

RED INSULATING VARNISH

UNDERCOATING & SOUND DEADENER

VINYL STRIPPABLE COATING

This anti-seize compound provides an aerosol delivery of a thin black film for stud assemblies, flange bolts, cylinder heads, high temperature connections, and manhole lugs.

USDA H-2
Performs at temperatures up to 2000°F (1093°C)
Uses: For nuts, bolts, screws, sprockets and chains, brake assemblies, gaskets, valve assemblies, pump mountings, threaded surfaces, conveyors, winches, and manifold surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown's copper, aerosol anti-seize is designed to lubricate and protect most metals from corrosion and seizing.

Meets MIL-A-907E
Durable, long-lasting film
Eliminates parts wear and breakage
Will not harden, separate, or evaporate
Does not contain clay or soap base thickeners
Operating temperature range between -40°F and 2000°F
Cannot be burned off and will not melt or run out after application
Protects parts under extreme heat, cold, pressure, steam, and salt water exposure
Protects against corrosion, seizing, rust, galling, galvanic pitting, and carbon fusing
Contains the maximum blend of metallic boundary lubricants, homogenized into a specially designed semi-synthetic lubricating grease
Uses: For nuts, bolts, screws, sprockets and chains, brake assemblies, gaskets, valve assemblies, pump mountings, threaded surfaces, conveyors, winches, and manifold surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown's food grade anti-seize is designed to lubricate and protect most metals from corrosion and seizing.

Meets MIL-A-907E
Durable, long-lasting film
Eliminates parts wear and breakage
Will not harden, separate, or evaporate
Does not contain clay or soap base thickeners
Operating temperature range between -40°F and 1000°F
Cannot be burned off and will not melt or run out after application
Brush top bottle has angled applicator brush so entire contents can be removed
Protects parts under extreme heat, cold, pressure, steam, and salt water exposure
Protects against corrosion, seizing, rust, galling, galvanic pitting, and carbon fusing
Contains the maximum blend of metallic boundary lubricants, homogenized into a specially designed semi-synthetic lubricating grease
Uses: For nuts, bolts, screws, sprockets and chains, brake assemblies, gaskets, valve assemblies, pump mountings, threaded surfaces, conveyors, winches, and manifold surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown's nickel, aerosol anti-seize is designed to lubricate and protect most metals from corrosion and seizing.

Meets MIL-A-907E
Durable, long-lasting film
Eliminates parts wear and breakage
Will not harden, separate, or evaporate
Does not contain clay or soap base thickeners
Operating temperature range between -40°F and 2600°F
Cannot be burned off and will not melt or run out after application
Protects parts under extreme heat, cold, pressure, steam, and salt water exposure
Protects against corrosion, seizing, rust, galling, galvanic pitting, and carbon fusing
Contains the maximum blend of metallic boundary lubricants, homogenized into a specially designed semi-synthetic lubricating grease
Uses: For nuts, bolts, screws, sprockets and chains, brake assemblies, gaskets, valve assemblies, pump mountings, threaded surfaces, conveyors, winches, and manifold surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Anti-Static Compound is designed to minimize static electricity on a variety of surfaces.

Neutralizes static electricity
Inhibits airborne dust accumulation
Non-staining and paintable, following normal cleaning
Uses: Textiles, rubber, metal, paper, leather, tile, cellophane, and machine operations.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Provides a tough, durable coating for battery terminals, cables, and clamps.

Prolongs battery life
Will not crack, chip, or peel
Dries quickly and protects instantly
Assures continued high-voltage output
Prevents hard starting, current loss, and battery failure
Adheres to all types of surfaces and remains flexible at low temperatures
Resists the corrosive effects of battery acid, moisture, dirt, grease, and oil
Provides an airtight and waterproof, insulated coating that minimizes leakage
Uses: Effective on all types of batteries for auto, cycle, marine, and aircraft. Use on battery terminals, cable connectors, casings and frames, clamps and battery posts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Provides excellent rust protection for metal parts that must be stored, indoors or outdoors, for long periods of time.

Does not contain silicone
Meets MIL-C-16173E, Grade 4
Easily removed with mild soap and water
Prevents corrosion caused by fingerprints
Penetrates cracks, assuring complete protection
Neutralizes acid formed by corrosive atmosphere
Non-sticky, film provides excellent corrosion protection
Seals out acid, moisture, air, salt water and other corrosive elements
Uses: All metal surfaces, marine equipment, farm machinery, construction equipment, electric motors, engines, storage tanks, pipes, dies, molds, parts, tools, vehicle and machinery bodies and frames, containers, cables, industrial parts, electrical equipment, threads, locks, gears, railroad equipment, and sporting equipment.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Drive Belt Dressing prevents belt slippage and glazing for better motor efficiency and longer belt life.

USDA P-1
Increases pulling power up to 50%
Will not glaze or collect dirt or dust
Can be applied to belts while running
Restores suppleness and flexibility to belts
Reduces squeaks and slippage by aiding in traction
Effective on all types of belts, new and used; rubber, canvas, leather, and fabric
Uses: Industrial belt drives, including generators and fans. Flat, round, or V-style belts, auto fan, water pump, transmission, power steering, farm machinery, appliance, air conditioners, equipment, and power tool belts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Drive Belt Grip is specially formulated to prevent belt slippage and glazing for better motor efficiency and longer belt life.
Restores suppleness and flexibility to belts
Conditions belts
Increases pulling power up to 50%
Reduces squeaks and slippage by aiding in traction
Effective on all types of belts, new and used
Can be applied to belts while running
Safe for use on rubber, canvas, leather, and fabric belts
Will not glaze or collect dirt or dust
USDA P-1 (Click on USDA link for category descriptions)
Contains no asphalt
Uses: Industrial belt drives including generators and fans; flat, round, or V-style belts, auto fan, water pump, transmission, power steering, farm machinery, appliance, air conditioners, equipment, and power tool belts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Insulating Epoxy is a tough, flexible coating that protects and insulates exposed wires and electrical windings. Effective for insulating coils, transformers and other electrical components.
Air dries in 15 minutes, hardens in 1 hour
Penetrates thoroughly and forms a tough, flexible film
Dielectric strength: up to 2,270 volts
Excellent adhesion and high arc resistance
Superior to lacquers and acrylics
Allows for motor heat expansion and contraction
Resists abrasion and wear; will not chip, peel, or become brittle
Resists oil, water, acids, and alkalis
Penetrates, coats, and seals in one step
Uses: Field coils, motor windings, taped coils, exposed metal, frayed insulation, pitted motor windings, bus bars and switchboard parts, transformers, commutator ends, sealing electrical and electronic components, collector rings, transformers, armatures, and inside walls of control boxes.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Red Insulating Varnish is a Class B epoxy ester with a dielectric strength of 1200V/mil wet and 2100V/mil dry.

Flexible, tough, oil-proof film
Cures completely in 24 hours
Penetrates, coats, and seals in one step
Darkness of color indicates coating thickness
Uses: For armature and stator windings, high voltage circuits, coating frayed insulation, and to restore dielectric properties lost as a result of wear or damage.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Undercoating & Sound Deadener is a quick-drying, rubberized film designed to offer maximum coverage and superior insulation properties against road and chassis noise.
Tough, flexible coating
Fast-drying
Deadens sound
Coating remains flexible; will not flake or chip off under vibration
Resists rust abrasion and vibration
Superior protection against rust, road salt, mild alkali and acids, dust, fumes, and moisture
This product is not available for sale in the state of California
Uses: Auto underbodies, trunks, fender and body seams, rust holes, weld joints, gas tank, fenders, rocker panels, door panels. Can also be used to seal rain gutters, coat tree wounds, for minor roof repairs, driveway cracks, and swamp and tower cooler coatings.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Vinyl Strippable Coating provides a protective coating that is easy to remove from smooth, unpainted surfaces.

Easily peels off
No solvents required
Uses: For precision tools, castings, anodized aluminum, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Multi-purpose Wet Lubricants

ALL-4

APC™-961 GREASE-FREE LUBE/FILM

APC™-962 H.D. MULTIPURPOSE LUBE

APC™-963 H.D. CORROSION INHIBITOR

LUBE EZE™

TEF-LUBE™

Food Grade Lubricants

FOOD GRADE LUBE GREASE

FOOD GRADE LUBE OIL

FOOD GRADE SILICONE LUBE

Molybdenum Disulfide-Based Lubricants

DRY MOLY LUBRICANT

MOLY FOAMING CHAIN LUBE

MOLY GREASE

MOLY OIL/OPEN CHAIN LUBE

Specialty Lubricants/Penetrants

DRIPLESS OIL

DRY FILM LUBRICANT

DRY GRAPHITE LUBRICANT

GENERAL PURPOSE SILICONE LUBE

H.D. OPEN GEAR & WIRE ROPE LUBE

LITHIUM GREASE

PENETRATRING OIL

PERFORMANCE BLEND RUST-SOLV™

RUST INHIBITOR

SLIX-IT

SPINNERETTE LUBRICANT

T.F.E.® LUBRICANT

Metal Working Compounds/Fluids

ANTI-SPATTER (Liquid W/B Paintable)

BUTTERCUTT® CUT./TAP. CMPD. (Gallon)

BUTTERCUTT® CUT./TAP. CMPD. (Pint)

CUTTING OIL LIGHT OIL (Solvent-based)

CUTTING OIL (Water-based)

PRUSSIAN BLUE HIGH SPOT INDICATOR

TAP TOOL

TOOLMAKER'S INK BLUE

TOOLMAKER'S INK REMOVER

Crown All-4 displaces moisture, lubricates and inhibits corrosion.

Silicone free
No gummy residue
Cleans away dirt and grease
Fills microscopic irregularities on surfaces
Meets Military Spec. #MIL-C-16173D, Group III
Uses: Machinery, spare parts, nuts, bolts, lawn mowers, guns, wheels, aircraft parts, taps and dies, marine and mining equipment, office machines, sliding doors, and hinges.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This light lubricant penetrates into tight crevices, provides a dry film, and resists oil, dust, and dirt buildup.
Provides short term corrosion protection
Displaces moisture
Spray-Any-Way valve allows product to be applied in either an upright or upside down position
Handles tough jobs such as unfreezing rusted and corroded parts
Cleans and lubricates delicate mechanisms
Does not contain chlorinated solvents or ozone depleting substances
Will not harm plastics or rubber
Conforms to MIL-C-23411A and O-W-001284
Uses: Electric motors, ignition systems, cables, nuts and bolts, locks and hinges, weight training equipment, and general office equipment.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

APC-962 is a heavy duty multipurpose lubricant that provides a non-drying, oil film with extra protection against corrosion.

Displaces moisture

Unlocks rusted parts and reduces wear

Does not contain any chlorinated solvents or silicones

Will not harm paint, rubber, and most plastics

Easy application in any position with Spray-Any-Way valve

Uses: For use on engines and electric motors, cables and linkages, parts being stored, hand tools, pulleys, production equipment, tracks, fasteners, bits, and dies.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

APC-963 is a heavy duty corrosion inhibitor that stops rust and corrosion in its tracks.

Penetrates to remove moisture

Provides a non-sling lubrication that holds up over time

Dries to a soft, translucent film that lasts up to two years

Does not contain chlorinated solvents or silicones

Safe for use on fabric, paint, rubber, and plastics

Easy application in any position with Spray-Any-Way valve

Uses: For use on bare metal, battery terminals, cables and chains, elevator parts, machinery storage, cranes, forklifts, pumps, outdoor tools and equipment, airbrake release springs, aircraft fuselages, and offshore drilling equipment.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A heavy duty, multi-purpose lubricant and penetrant that displaces moisture and prevents rust and corrosion. Premium petroleum oils and fast acting solvents are blended to soften and loosen rust-hardened nuts, bolts, and screws.
Displaces moisture
Prevents squeaks and sticking
The Spray-any-Way valve allows aerosol to be applied in either an upright or upside down position
Provides excellent rust and corrosion protection for all metals
Safe on electrical equipment
Eliminates the need to use silicones or old fashioned oils
Does not leave a residue
Dries out wet ignitions and wiring
Lubricates moving parts and loosens rust-hardened nuts, bolts, and screws
Uses: Fasteners, power tools, lathes, drill presses, ball bearings, seized or rusted bolts, conveyors, pulleys, scales, air tools, frozen joints, circuit breakers, gears, transmitters, sporting equipment, hand tools, instruments, locks, hinges, generators, weapons, guide rails, fishing reels, and bike chains.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Tef-Lube™ is a superior lubricant that combines the advantages of high-grade petroleum oils and solvents with micron-sized P.T.F.E. to provide the finest multi-component penetrating lubricant system available. Extreme pressure additives act to keep the P.T.F.E. in place for long-lasting lubrication. Tef-Lube™ keeps equipment in service longer and reduces costly breakdowns due to worn and dirty parts.
Protects against moisture and corrosion; displaces moisture
Resists rust and corrosion under extreme conditions
Shields against dirt, dust, sand and other abrasive contaminants
Keeps equipment running longer
Reduces friction and increases part life
Reduces costly breakdowns caused by worn and dirty parts
Penetrates inaccessible areas with extension tube
Spray-Any-Way valve allows aerosol to be applied in either an upright or upside down position
Performs at temperatures from -60º F to 475º F
Meets MIL-C-372B (Small arms bore cleaner), MIL-C-23411/A (Corrosion preventive compound),VV-P-216B (Penetrating oil), VV-L-820C (General purpose lubricating oil), and VV-L-751C (Chain, wire rope lubricating oil)
Uses: Chains, bearings, gears, sprockets, conveyors, electric motors and switches, locks, air tools, firearms, fishing reels, sporting equipment, office machines, home appliances, and in aircraft maintenance and automotive assemblies.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Multi-service, non-melting, waterproof grease fortified with P.T.F.E. to form a durable film that withstands daily equipment wash downs.
UDSA H-1 (Click on USDA link for category descriptions)
Grease forms a tough, durable film that prevents metal-to-metal contact
Lubricates, seals out water and resists chemical attack
Performs at temperatures up to 475° F
Compatible with most plastics; test surface for compatibility prior to use
N.L.G.I. Grade 2 · 35 lbs. load-carrying capacity based on Timken OK load tests
Dielectric strength of 30kV/mm
Non-staining formula
Uses: Use as a general purpose lubricant on slides, guides, chains, conveyors, and other transfer equipment found in food, beverage, meat, dairy, and marine processing plants. Gaskets and “O” rings, pump bearings, bushings, can seamers, valves, conveyors, electric motors, and universal joints. Best when used on unpainted surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Food Grade Lube Oil is economical, non-silicone lubricating oil for use on food processing equipment where incidental food contact may occur.
Penetrates the surface to loosen rust, corrosion, scale, and dirt
USDA H-1 (Click on USDA link for category descriptions)
Economical, general-purpose lubricant
Leaves a clear, stainless film that prevents machinery parts from sticking
Resists moisture and does not leave a residue
Non-silicone formula is excellent for use in areas where silicone over spray might interfere with carton sealing or capping operations
Separates from water even under acid/alkali conditions
Dielectric strength of 30kV/mm
Uses: Equipment in food processing plants, dairies, bakeries, soft drink plants, supermarkets, breweries, and grain elevators. Apply to chains, chain drive belts, bearings, belts, machinery valves, pistons, rollers, stainless steel pumps, bottle filling machinery, slicing machines, cams on rotary-type fillers, mixers, conveyors, slides, guides, and past and sauce fillers.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A low viscosity silicone lubricant that eliminates squeaks and insulates and waterproofs electrical parts.

USDA H-1
4% Silicone formula
Odorless, colorless, non-staining, dry residual film
Prevents sticking and won't transfer to end parts
Will not interfere with carton sealing, bottle capping, other food preparation operations
Will not harm paint, metal, wood surfaces, and most plastics
Separates from water even under acid/alkali conditions
Waterproofs ignition systems
Dielectric strength of 35kV/mm
Uses: Metal hinges, plastic rollers, guide rails, slides, or anything that sticks. Can also be used on air tables and on food preparation equipment such as dough mixers, food racks, knives, slicing machines, guards, saws, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This quick drying lubricant leaves a thin film that provides extreme pressure lubrication.

Fast drying, resists corrosion
Does not contain oil or dilutants
Withstands pressures up to 100,000 psi
Prevents sliding or threaded parts from seizing
Ideal for assembly and break-in lubricating
Bonds to metal surfaces without attracting dirt or dust
Provides lubrication at temperatures between - 100°F and 700°F (-73°C to 371°C)
Uses: Automotive and industrial gaskets, grinding belts, threaded connections, metal belts, rubber components, sliding surfaces and gears, shafts, hinges, cams, bearings, chain drives and pulleys, chutes and bins, vending machines, and conveyor belts where heat is present. Works well in assembly and break-in of motors, machinery, pumps, compressors, and valves.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A high grade lubricating oil that is fortified with molybdenum disulfide to penetrate inaccessible areas and provide superior lubrication where temperature and stress will break down ordinary lubricants.
Excellent water displacing characteristics provide corrosion protection
Foaming action provides excellent coverage and penetration
Fortified with Paratac to adhere to fast moving chains
Dark gray color allows easy visibility of application
Will not wash away or rub off
Reduces wear and increases chain life
Performs at temperatures between -20°F and 300°F (-29°C and 149°C)
FALEX E.P. Test Fallen Load to 4,500 lbs.
Uses: Chain drives and pins, open gearing, sprockets, wire ropes, bushings, rollers, clippers, cables, hoists, gearboxes, chain saws, conveyors, motorcycle and bicycle chains, and other metal surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This high-grade molybdenum disulfide lubricant waterproofs and rust proofs while under heavy stress and vibration.

Prevents seizing and galling
Performs at temperatures up to 450°F (232°C)
Stays in place under extreme pressure loads; will not leak out
Uses: Electric motor bearings, open or exposed gears, fan, pump and conveyor bearings, power take-off, wire rope, fifth wheels, machine tools, metal forming presses, threads, sprockets, hoists, and anywhere heat is generated from metal-to-metal contact. Ideal for forklift maintenance of cables and chains as well as flexible couplings.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A high grade lubricating oil that is fortified with molybdenum disulfide to penetrate inaccessible areas and provide superior lubrication where temperature and stress will break down ordinary lubricants.

Will not wash away or rub off
Provides excellent metal penetration
Reduces wear and increases chain life
FALEX E.P. Test Fallen Load to 4,500 lbs
Dark gray color allows easy visibility of application
Travels deep into wire ropes and exposed gearboxes, and along cabling
Performs at temperatures between -20°F and 300°F (-29°C and 149°C)
Uses: Chain drives and pins, open gearing, sprockets, wire ropes, bushings, rollers, clippers, cables, clippers, hoists, gearboxes, chain saws, conveyors, motorcycle and bicycle chains, and other metal surfaces.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Dripless Oil provides the fluidity of an oil with the that acts as a grease, eliminating messy drips.

Non-foaming
Does not contain soap
Prevents spotting and leaking
Uses: Overhead chains, conveyors, bearings, and forming presses.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

An industrial strength lubricant that is ideal whenever silicone products are not acceptable, and higher temperatures or pressure performance is required.

Reduces clean-up labor time and costs
Safe for rubber, wood, and metals
Won't interfere with post-finishing operations
Durable up to 500°F (260°C) for extended periods
Unique lubricating qualities; extremely effective against dust
Uses: Recommended for use in any situation where reduced friction and drag is desired on plastic, glass, rubber, metal, or wood. Ideal in textiles industry on instruments, tools, drawers, windows, conveyor belts, cord, wire, and machine parts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Specifically designed for engine or mechanical parts prior to their assembly. Made of synthetic colloidal graphite, it is an ideal lubricant when petroleum products must be avoided.

Uniform coat bond prevents scoring and seizing
Dry, oil-free coating that won't attract dirt or dust
Does not contain oil or moisture-based dilutants
Excellent choice for extreme temperature lubrication
Unique protective film gives "new finish" appearance
Provides lubrication at temperatures of -100°F to 1000°F (-73°C to 538°C)
Uses: Ideal on automotive and industrial gaskets, conveyors, bearings, sliding windows and doors, locks, springs, chains, sprockets, plating non-conductors, mating surfaces on machines, and pre-assembly lubrication of moving parts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This multi-purpose food grade lubricant leaves a clear residual dry film that helps prevent sticking without transferring to the surface. Slower dry allows for full penetration into rubber surfaces.

USDA H-1
5% silicone formula
Will not harm most plastics
Repels water; waterproofs ignition systems
Insulates, stops squeaks and sticking, prevents freezing
Brings life back to old rubber and weather-stripping keeping it soft and flexible
Uses: Metal hinges, plastic rollers, rubber mountings, electrical insulation, slides, guides, conveyors, dough mixers, saws, grinders, doors, locks, trunk lids, and any sliding surface.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A high-grade moly grease that won't become brittle, is not affected by weather, and has outstanding adhesion properties.

Minimizes internal friction
Withstands extreme pressures with maximum adhesion
Displaces water to provide excellent rust and corrosion protection
Prevents metal bearing surfaces from becoming crazed and brittle
Performs at temperatures between 0°F and 250°F (-18°C and 121°C)
Withstands wash downs; migrates on metal surfaces to the core of wire rope and spring windings
Uses: Wire rope, exposed gears, winches, roller chains, elevator cables, conveyor rolls, fifth wheels on tractor trucks, draglines, construction machinery, and anywhere else that lubrication and superior mastic properties are desired.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This all weather grease and lubricant is recommended for general metal-to-metal applications. It is compatible with plastics and rubber, and doesn't drip or run on vertical surfaces.

USDA H-2
Provides all-weather lubrication for moving parts
Reduces friction and eliminates squeaks and squeals
Excellent compatibility with exotic metals, plastics, and rubber
Resists corrosion and oxidation on unpainted metal surfaces
Effective at temperatures of -70°F to 360°F (-57°C to 182°C)
Includes extension tube for precision application in hard to reach areas
Uses: Chains, gears, drives, hinges, intricate metal catches, fine gear cases, bolts, and other vertical or overhead surfaces. Can also be used on knockout pins on mold equipment.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Penetrating Oil loosens rust and corrosion formed by alkali, fruit acids, water, and electrolysis.

USDA H-2
Displaces moisture
Attacks rust and corrosion to free frozen parts
Flash point >160°F (71°C)
Dielectric strength 35kV/mm
Formulated with low surface tension for fast penetrating action
Makes disassembly of parts possible with savings in time and material
Uses: Metals, alloys, rubber, and most painted surfaces. Release rusted and corroded nuts, pipes, pumps, hinges, valves, screws, pulleys, shafting, mufflers, stud bolts, heat, risers, battery cables, roller conveyers, and wheel lug nut release.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Performance Blend Rust-Solv™ quickly loosens rust while penetrating grease and dirt. This product is not a lubricant, but a deep penetrant made especially for freeing seized and/or frozen parts and assemblies.
High speed, high flash, non-acid penetrating fluid
High-solvency value makes it an ideal degreaser
Safe to use in non-heat, electrical exposure
Works on all forms of oxides, including copper, iron, lead, and zinc
Dielectric strength 25kV/mm
Will not harm painted surfaces
Uses: Loosens corroded or frozen nuts, pipes, locks, pumps, hinges, valves, screws, springs, pulleys, mufflers, lugs, stud bolts, brake linkage, heat risers, and battery cable terminals.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Rust Inhibitor prevents rust on tools, steel stock, and parts. Provides temporary or extended protection of machinery. Great for indoor storage.

Absorbs moisture
Fortified with lanolin
Neutralizes acid formed by corrosive atmosphere
Uses: Prevents rust on tools, steel stock, parts, and temporary or extended protection of machinery.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Slix-It provides non-staining, long lasting lubrication.

USDA H-2
Contains 6% silicone
Does not contain petroleum oil
Waterproofs and prevents corrosion
Uses: Protects electrical systems, preserves rubber, leather, canvas, and nylon. Ideal for drawers, locks, hinges, and conveyor guides.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Spinnerette Lubricant is a unique blend of clear, heat-stabilized silicone fluids formulated to give maximum release capabilities on various Spinnerette faces in man-made fiber producing plants. It is designed exclusively for lubricating the extrusion orifices of Spinnerette equipment. Available in aerosol and Giant Pressurized Tank (GPT) for economy in large volume applications.

Heat stable up to 600º F (316º C)
Lubricates and improves releases with longer intervals between scrape and wipe
Enhances spinning performance and increases production efficiency
High delivery, horizontal valve increases saturation; prevents molten polymer and polyester buildup at extrusion orifices that range from coarse to very fine deniers of fiber
Will not boil, flash, gel, gum, or oxidize and allows for extended heat exposure
Demonstrates very little change in viscosity and flow characteristics over a wide temperature range
Low odor
Improves fiber quality
Non-corrosive to common metals, even in the presence of oxygen
Uses: Designed exclusively for lubricating extrusion orifices of Spinnerette equipment.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown's T.F.E.® Lubricant is a heavy-duty lubricant made with P.T.F.E. to provide the ultimate in protection.

Resists moisture
Resin-bonded
Non-staining
Non-silicone formula; made with P.T.F.E.
Uses: Conveyor belts, machine tools, dies and locking mechanisms, cement molds, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This vegetable based formulation provides a protective film coating to aid in removal of weld spatter, and keeps welding tips and nozzles clean.
Light yellow, tacky film visually confirms coverage
Prevents weld spatter from adhering to surrounding metal surfaces
Eliminates grinding and chiseling
Quick and easy clean up
Does not contain silicones
Uses: Welding and torch cutting devices, including MIG and TIG nozzles and tips, weldments, electrode holders, fixtures, resistant welding tips, and in all types of maintenance/production welding applications.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This high temperature, high pressure film provides dependable tool point lubrication.

All natural ingredients
No etch or staining
Flash point of 550°F (288°C)
Uses: For boring, drilling, planing, milling, sawing, tapping, and many other close-tolerance operations. Use on stainless steel, nickel and copper alloys, die and tool steels, and other metals and alloys that are difficult to cut or tap.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This high temperature, high pressure film provides dependable tool point lubrication.

All natural ingredients
No etch or staining
Flash point of 550°F (288°C)
Uses: For boring, drilling, planing, milling, sawing, tapping, and many other close-tolerance operations. Use on stainless steel, nickel and copper alloys, die and tool steels, and other metals and alloys that are difficult to cut or tap.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Cutting-Oil is an all-purpose, solvent-based lubricant and coolant for industrial cutting operations.

Reduces wear
Helps make clean cuts
Great for soft or hard metals
Uses: Turret lathes, gear cutters, grinders, automatic screw machines, and pipe threaders.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

This non-flammable, water-based Cutting Oil improves metal cutting operations and increases efficiencies in machining operations.
Clings to surfaces
Reinforced with high-viscosity oils and sulfur-free, extreme pressure additives
Prolongs tool life, reduces tool sharpening and down time
Lubricates and cools at the cutting point
Low odor
Easily washes off with commercial cleaners or soap and water
Includes extension tube for precision application in hard to reach areas
USDA H-2 (Click on USDA link for category descriptions)
Uses: Sawing, tapping, grinding, machining, threading, and drilling. Recommended for use on all metals including stainless steel and soft metals such as aluminum, brass, and copper. Use on turret lathes, gear cutters, broaches, and automatic screw machines.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Prussian Blue High Spot Indicator is for determining high spots on surfaces and for mating components in assembly operations.

Quick identification of high spots
Significantly reduces timely level checks
Identify points of interference that cause heat and wear
Easily removed with Crown #6095 Toolmaker's Ink Remover
Uses: For locating high spots when scraping bearing surfaces, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

A synthetic lubricant that increases tool life by as much as 200%.

Carries heat away from cutting edge and tool
Reduces breakage and friction
Uses: For drilling, tapping, milling, threading, boring, broaching, reaming, turning, and engraving.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Toolmaker's Ink enables accurate scribing without glare. It produces a quick-drying film that won't peel, flake, or rub off. Surfaces may be scribed with a sharp tool within five minutes of application.

Quick drying
Reduces glare
Does not contain acids
Precise scribing without chipping
Excellent adhesion to all metals, glass, or plastics
Uses: Can be used for production layouts, patternmaking, tool, die, and model making. May be used for templates and machined parts.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown Toolmaker's Ink Remover works without leaving bothersome residues. The special solvent blend dissolves the organic resins thereby allowing complete removal of ink residues. Aerosol packaging speeds the action of the remover and lets you spray the remover exactly where you wish to clean, with mess.

Does not leave a residue
Easy aerosol application
Dissolves all layout fluids
Can be used as paint stripper
Uses: Use to remove Crown Toolmaker's Ink and other layout fluids from the surface of completed work. Can also be used as a paint stripper.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

FAULT FINDER KIT GROUP IA 

FAULT FINDER CLEANER GROUP 1A

FAULT FINDER PENETRANT GROUP 1A

FAULT FINDER DEVELOPER GROUP 1A

FAULT FINDER KIT GROUP 1

FAULT FINDER CLEANER GROUP I

FAULT FINDER PENETRANT GROUP I

FAULT FINDER DEVELOPER GROUP I

Crown die penetrant inspection systems quickly locate cracks and defects in metals, glass, and plastics. Group 1A Kit includes 4 cans #1011 Cleaner, 2 cans #1012 Penetrant, and 2 cans #1013 Developer.

Conforms to MIL-I-25135
Certified low in chlorine and sulfur-bearing solvents
Least flammable system because of its carrier solvents
Active ingredients meet chlorine and sulfur requirements of NAVSHIPS 250-1500 and MIL STD 271
Uses: Ideal for non-destructive testing (NDT), in fields of welding, automotive (manufacturing and repair), aircraft, airlines, railroads, government, oil drilling, foundry, fastener, construction machinery, etc. For technical data on the contents of this kit, search for individual product numbers (1011, 1012, 1013).

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown die penetrant inspection systems quickly locate cracks and defects in metals, glass, and plastics. Use #1011 Cleaner to clean surface to be tested.

Conforms to MIL-I-25135
Certified low in chlorine and sulfur-bearing solvents
Least flammable system because of its carrier solvents
Active ingredients meet chlorine and sulfur requirements of NAVSHIPS 250-1500 and MIL STD 271
Uses: Ideal for non-destructive testing (NDT), in fields of welding, automotive (manufacturing and repair), aircraft, airlines, railroads, government, oil drilling, foundry, fastener, construction machinery, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown die penetrant inspection systems quickly locate cracks and defects in metals, glass, and plastics. Use #1012 as step two after you've cleaned the surface with #1011 Cleaner. Allow time for penetrant to set.

Conforms to MIL-I-25135
Certified low in chlorine and sulfur-bearing solvents
Least flammable system because of its carrier solvents
Active ingredients meet chlorine and sulfur requirements of NAVSHIPS 250-1500 and MIL STD 271
Uses: Ideal for non-destructive testing (NDT), in fields of welding, automotive (manufacturing and repair), aircraft, airlines, railroads, government, oil drilling, foundry, fastener, construction machinery, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown die penetrant inspection systems quickly locate cracks and defects in metals, glass, and plastics. #1013 Developer is sprayed on after the #1012 Penetrant and allows for a visual inspection. Red cracks and other faults will appear in white developer area.

Conforms to MIL-I-25135
Certified low in chlorine and sulfur-bearing solvents
Least flammable system because of its carrier solvents
Active ingredients meet chlorine and sulfur requirements of NAVSHIPS 250-1500 and MIL STD 271
Uses: Ideal for non-destructive testing (NDT), in fields of welding, automotive (manufacturing and repair), aircraft, airlines, railroads, government, oil drilling, foundry, fastener, construction machinery, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown die penetrant inspection systems quickly locate cracks and defects in metals, glass, and plastics. Group 1 Kit includes 4 cans #1071 Cleaner, 2 cans #1072 Penetrant, and 2 cans #1073 Developer. Group 1 does not contain sulfur-bearing solvents. These products were developed specifically for test materials where halogenated safety solvents are not permitted.

Conforms to MIL-I-25135
Active ingredients meet RDT F-3-6T standard established by the Atomic Energy Commission
Active ingredients meet chlorine and sulfur requirements of NAVSHIPS 250-1500 and MIL STD 271
Uses: Ideal for non-destructive testing (NDT), in fields of welding, automotive (manufacturing and repair), aircraft, airlines, railroads, government, oil drilling, foundry, fastener, construction machinery, etc. For technical data, search for individual products that make up this kit ( 1071, 1072, 1073)

Back

Prices Upon Request

To Account Holders

Via Email or Fax

Crown die penetrant inspection systems quickly locate cracks and defects in metals, glass, and plastics. Use #1011 Cleaner to clean surface to be tested.

Conforms to MIL-I-25135
Active ingredients meet RDT F-3-6T standard established by the Atomic Energy Commission
Active ingredients meet chlorine and sulfur requirements of NAVSHIPS 250-1500 and MIL STD 271
Uses: Ideal for non-destructive testing (NDT), in fields of welding, automotive (manufacturing and repair), aircraft, airlines, railroads, government, oil drilling, foundry, fastener, construction machinery, etc.

Back

Prices Upon Request

To Account Holders

Via Email or Fax