|
|
|
|

This fast-drying, industrial strength solvent is
inexpensive and ideal for cleaning and degreasing. It removes
grease, oil, wax, adhesives, and other contaminants without
leaving a residue. Packaged in Aervoe’s GPT, it provides the
convenience of an aerosol spray with the cost savings of a
longer lasting bulk container. Refillable tanks minimize
storage concerns Eliminates aerosol can disposal issues
Spray valve and tip match actual aerosol can components
Unique wetting action, penetrates and degreases in
inaccessible cracks and crevices Reduces failures and
helps to increase equipment life by eliminating faulty
operation of dirty moving parts Fast-acting solvent
penetrates easily, evaporates quickly, leaves no residue
Can be applied while mechanical parts are operating
Non-corrosive, non-conductive formula displaces moisture
High dielectric strength of 33kV/mm Does not contain
CFCs, HCFCs, or chlorinated solvents Includes extension
tube for precision application in hard to reach areas USDA
K-1 (Click on USDA link for category descriptions) Uses:
Motors, tools, machinery, metal parts, mechanical equipment,
air conditioners, aircraft parts, automotive parts, bearings,
chains, packaging machinery, compressors, generators, portable
tools, office machinery, pumps, mechanical brakes and
clutches, relays, gears, cables, locks, sporting equipment,
solenoids, and more.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

G400 is a no-flash, non-corrosive solvent and degreaser
that effectively removes oil, grease, wax, dirt, and moisture.
The high-pressure spray action combined with its unique
wetting action penetrates inaccessible areas, effectively
flushing away contaminants without leaving a residue. Packaged
in Aervoe’s GPT, it provides the convenience of an aerosol
spray with the cost savings of a longer lasting bulk
container. Refillable tanks minimize storage concerns
Eliminates aerosol can disposal issues Spray valve and
tip match actual aerosol can components No flash formula
Can be applied while mechanical parts are operating
Fast-acting solvent penetrates easily, evaporates quickly,
leaves no residue Unique wetting action, penetrates and
degreases in inaccessible cracks and crevices Reduces
failures and helps to increase equipment life by eliminating
faulty operation of dirty moving parts Non-corrosive,
non-conductive formula displaces moisture High dielectric
strength of 30kV/mm Does not contain CFCs, HCFCs, or
chlorinated solvents Includes extension tube for precision
application in hard to reach areas Uses: Chains, motors,
electrical boxes, aircraft parts, machinery, automotive parts,
tools, mechanical brakes and clutches, relays, cables, locks,
gears, portable tools, radar equipment, generators, bearings,
compressors, switch gears, office machinery, pumps, mechanical
brakes and clutches, and more.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This fast penetrating cleaner is highly refined and
designed for use on high-tech electronic hardware and PCBs and
PWBs. It is safe for use on metal, plastics, rubber, and glass
surfaces. This product should not be used on energized
equipment or equipment in operation. Packaged in Aervoe’s GPT,
it provides the convenience of an aerosol spray with the cost
savings of a longer lasting bulk container. Refillable
tanks minimize storage concerns Eliminates aerosol can
disposal issues Spray valve and tip match actual aerosol
can components Quick, penetrating action Leaves no
residue Effectively removes grease, oil, dirt, and other
contaminants Does not contain CFCs, HCFC, or chlorinated
solvents Includes extension tube for precision application
in hard to reach areas Displaces water and moisture
Trigger spray action assures complete saturation
Unique wetting action cleans the finest of instruments,
contacts, relays, precision mechanical or electrical
solenoids, and other delicate hardware Uses: Electrical
components, connectors, contacts, magnetic tape heads,
semiconductor assemblies, precision instruments, office
equipment, printed circuits, computer components, relays and
controls, telephone equipment, typewriters, and TV tuners.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

DustAir™ is a pure, non-CFC controlled air source that
removes dust and airborne contaminants from delicate
instruments without scratching the surface. Packaged in
Aervoe’s GPT, it provides the convenience of an aerosol spray
with the cost savings of a longer lasting bulk container.
Refillable tanks minimize storage concerns Eliminates
aerosol can disposal issues Spray valve and tip match
actual aerosol can components High-delivery trigger spray
action Includes extension tube for precision application
in hard to reach areas Non-abrasive Safe for use on
plastics Safe for use on energized equipment
Effectively removes microscopic particles of lint, ferrous
oxide, and other contaminants Ideal for use on delicate
components and instruments where residual entrapment could be
a problem Dirt, dust, pollen, and other debris are
forcefully dislodged from delicate instruments Uses:
Electronics, laboratory equipment, data processing and
optical, precision mechanical parts, person computers,
electrical circuitry, and photographic equipment. Available in
two convenient aerosol sizes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Carb & Choke Cleaner is a fast-acting blend of solvents
that loosens and dissolves grease, carbon, dirt, varnish
build-up, and gumming to maximize carburetor performance.
Packaged in Aervoe’s GPT, it provides the convenience of an
aerosol spray with the cost savings of a longer lasting bulk
container. Refillable tanks minimize storage concerns
Eliminates aerosol can disposal issues Spray valve and
tip match actual aerosol can components Eliminates rough
idling, stalling, engine run-on, and starting hesitation
Quick and easy to use, fast drying, and leaves nor film or
residue Will not harm catalytic converters or oxygen
sensors Cleans heat risers by dissolving buildup around
shaft Spray around housing and block to remove grease and
dirt buildup Does not contain CFC’s, HCFC’s, or
chlorinated solvents Removes varnish build-up
Maximizes carburetor performance Includes extension
tube for precision application in hard to reach areas
Uses: PVC valves, automatic chokes, carburetor components,
and crankcase breather elements, exhaust gas recycling valves
(ERGs) and intake parts. Can be used in any carburetor or fuel
injected gasoline engine.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This non-corrosive degreaser is effective in removing oil,
grease, wax, dirt, and moisture from brake drums, linings, and
pads. Packaged in Aervoe’s GPT, it provides the convenience of
an aerosol spray with the cost savings of a longer lasting
bulk container. Refillable tanks minimize storage concerns
Eliminates aerosol can disposal issues Spray valve and
tip match actual aerosol can components Dries in less than
2 minutes High-pressure action and unique wetting
properties degreases and penetrates into inaccessible areas
Includes extension tube for precision application in hard
to reach areas Stops annoying break squeal Reduces
airborne asbestos dust Keeps brake shoe pads at top level
of performance Does not contain CFCs, HCFCs, or
chlorinated solvents Effectively removes oil, grease, wax,
dirt, and moisture Uses: Drum and disk-type brakes. Can
also be used for cleaning chains, gears, bearings, clutches,
U-joints, and other areas where grease and oil have
accumulated.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

A heavy duty, multi-purpose lubricant and penetrant that
displaces moisture and prevents rust and corrosion. Premium
petroleum oils and fast acting solvents are blended to soften
and loosen rust-hardened nuts, bolts, and screws. Packaged in
Aervoe’s GPT, it provides the convenience of an aerosol spray
with the cost savings of a longer lasting bulk container.
Refillable tanks minimize storage concerns Eliminates
aerosol can disposal issues Spray valve and tip match
actual aerosol can components Displaces moisture
Prevents squeaks and sticking The Spray-any-Way valve
allows aerosol to be applied in either an upright or upside
down position Provides excellent rust and corrosion
protection for all metals Safe on electrical equipment
Eliminates the need to use silicones or old fashioned oils
Does not leave a residue Dries out wet ignitions and
wiring Lubricates moving parts and loosens rust-hardened
nuts, bolts, and screws Uses: Fasteners, power tools,
lathes, drill presses, ball bearings, seized or rusted bolts,
conveyors, pulleys, scales, air tools, frozen joints, circuit
breakers, gears, transmitters, sporting equipment, hand tools,
instruments, locks, hinges, generators, weapons, guide rails,
fishing reels, and bike chains.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Food Grade Lube Oil is economical, non-silicone lubricating
oil for use on food processing equipment where incidental food
contact may occur. Packaged in Aervoe’s GPT, it provides the
convenience of an aerosol spray with the cost savings of a
longer lasting bulk container. Refillable tanks minimize
storage concerns Eliminates aerosol can disposal issues
Spray valve and tip match actual aerosol can components
Penetrates the surface to loosen rust, corrosion, scale,
and dirt USDA H-1 (Click on USDA link for category
descriptions) Economical, general-purpose lubricant
Leaves a clear, stainless film that prevents machinery
parts from sticking Resists moisture and does not leave a
residue Non-silicone formula is excellent for use in areas
where silicone over spray might interfere with carton sealing
or capping operations Separates from water even under
acid/alkali conditions Dielectric strength of 30kV/mm
Uses: Equipment in food processing plants, dairies,
bakeries, soft drink plants, supermarkets, breweries, and
grain elevators. Apply to chains, chain drive belts, bearings,
belts, machinery valves, pistons, rollers, stainless steel
pumps, bottle filling machinery, slicing machines, cams on
rotary-type fillers, mixers, conveyors, slides, guides, and
past and sauce fillers.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Spinnerette Lubricant is a unique blend of clear,
heat-stabilized silicone fluids formulated to give maximum
release capabilities on various Spinnerette faces in man-made
fiber producing plants. It is designed exclusively for
lubricating the extrusion orifices of Spinnerette equipment.
Packaged in Aervoe’s GPT, it provides the convenience of an
aerosol spray with the cost savings of a longer lasting bulk
container. Refillable tanks minimize storage concerns
Eliminates aerosol can disposal issues Spray valve and
tip match actual aerosol can components Heat stable up to
600º F (316º C) Lubricates and improves releases with
longer intervals between scrape and wipe Enhances spinning
performance and increases production efficiency High
delivery, horizontal valve increases saturation; prevents
molten polymer and polyester buildup at extrusion orifices
that range from coarse to very fine deniers of fiber Will
not boil, flash, gel, gum, or oxidize and allows for extended
heat exposure Demonstrates very little change in viscosity
and flow characteristics over a wide temperature range Low
odor Improves fiber quality Non-corrosive to common
metals, even in the presence of oxygen Uses: Designed
exclusively for lubricating extrusion orifices of Spinnerette
equipment.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This general-purpose industrial strength mold release
contains a light silicone fluid that is ideal for hot or cold
molds. Packaged in Aervoe’s GPT, it provides the convenience
of an aerosol spray with the cost savings of a longer lasting
bulk container. Refillable tanks minimize storage concerns
Eliminates aerosol can disposal issues Spray valve and
tip match actual aerosol can components Contains 2%
silicone Ideal for hot or cold molds Odorless and fast
evaporating Heat stable at temperatures up to 550ºF
(288ºC) Meets FDA regulation 21CFR181.28 as a release
agent in the manufacture of food contacting materials
Non-staining, non-corrosive formula Does not contain
ozone depleting substances Uses: Plastic injection
molders, compression molders, extruders, and foundries, blow
molders, investment castings, and candle molders. Recommended
for use on A.B.S. resins, acrylics, wax, rubber, polyesters,
cellulosics and polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Food Grade Silicone Mold Release is an effective release
agent typically used for foundries, compression molders,
investment castings, extruders, blow molders, candle molders,
and plastic injection molders. Packaged in Aervoe’s GPT, it
provides the convenience of an aerosol spray with the cost
savings of a longer lasting bulk container. Refillable
tanks minimize storage concerns Eliminates aerosol can
disposal issues Spray valve and tip match actual aerosol
can components Contains 3% silicone USDA H-1 (Click on
USDA link for category descriptions) Meets FDA regulation
21CFR181.28 as a release agent in the manufacture of food
contacting materials Ideal for hot or cold molds
Non-staining, non-corrosive formula Heat stable at
temperatures between 40º F and 550º F (4º C and 288º C)
Low flash Safe on rubber, wood and most plastics
Does not contain ozone-depleting substances. Uses:
Plastic injection molders, compression molders, extruders, and
foundries, blow molders, investment castings, and candle
molders. Recommended for use on A.B.S. resins, acrylics, wax,
rubber, polyesters, cellulosics and polystyrenes. Provides
excellent lubricating properties for guides, saws, conveyors,
and rollers on packaging equipment.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This heavy-duty industrial strength mold release is a
high-viscosity silicone that provides maximum releases under
the most severe molding conditions. Packaged in Aervoe’s GPT,
it provides the convenience of an aerosol spray with the cost
savings of a longer lasting bulk container. Refillable
tanks minimize storage concerns Eliminates aerosol can
disposal issues Spray valve and tip match actual aerosol
can components Contains 4% silicone High purity
formulation minimizes sticking, glazing, crazing, spotting and
other causes for rejects Low odor, fast evaporating
Heat stable up to 550º F (288º C) Low Flash,
non-corrosive Will not interfere with post finishing
processes such as painting, stenciling, hot stamping, gluing,
or other forms of decorating Compatible with most moldable
resins, elastomer compounds, rubber, wax, and plastic Does
not contain ozone depleting substances Uses: Injection
molding and hot or cold molding processes for rubber,
polystyrenes, polyurethane foams, plastic, metal castings and
elastomeric materials.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Specially formulated silicone fluids that provide excellent
release properties that are ideal for all types of plastics
where decorating is required after molding. Packaged in
Aervoe’s GPT, it provides the convenience of an aerosol spray
with the cost savings of a longer lasting bulk container.
Refillable tanks minimize storage concerns Eliminates
aerosol can disposal issues Spray valve and tip match
actual aerosol can components Contains 2% silicone
Odorless, non-staining, non-corrosive formula Heat
stable up to 550º F Long lasting, anti-stick film
Allows for multiple part releases per application Low
flash Increases molding efficiency Does not contain
ozone depleting substances Ideal for injection molding and
hot or cold molding processes Compatible with most
moldable resins, elastomer compounds, rubber, wax, and plastic
Uses: Injection molding and hot or cold molding processes
for rubber, polystyrenes, polyurethane foams, plastic, metal
castings and elastomeric materials.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

An industrial strength release agent that is economically
priced to help resist costly breakdowns. Packaged in Aervoe’s
GPT, it provides the convenience of an aerosol spray with the
cost savings of a longer lasting bulk container.
Heat stable at temperatures up to 550°F (288°C)
Increases molding efficiencies Allows for multiple
parts releases per application Ideal for hot or cold
molding processes Non-staining and non-corrosive Low
toxicity Uses: Plastic injection molders, compression
molders, extruders and foundries, blow molders, investment
castings and candle molders. Recommended for use on A.B.S.
resins, acrylics, wax, rubber, polyesters, cellulosics and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

An industrial strength release agent that is economically
priced to help resist costly breakdowns. Packaged in Aervoe’s
GPT, it provides the convenience of an aerosol spray with the
cost savings of a longer lasting bulk container.
Heat stable at temperatures up to 550°F (288°C)
Increases molding efficiencies Allows for multiple
parts releases per application Ideal for hot or cold
molding processes Non-staining and non-corrosive Low
toxicity Uses: Plastic injection molders, compression
molders, extruders and foundries, blow molders, investment
castings and candle molders. Recommended for use on A.B.S.
resins, acrylics, wax, rubber, polyesters, cellulosics and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

An industrial strength release agent that is economically
priced to help resist costly breakdowns. Packaged in Aervoe’s
GPT, it provides the convenience of an aerosol spray with the
cost savings of a longer lasting bulk container.
Heat stable at temperatures up to 550°F (288°C)
Increases molding efficiencies Allows for multiple
parts releases per application Ideal for hot or cold
molding processes Non-staining and non-corrosive Low
toxicity Uses: Plastic injection molders, compression
molders, extruders and foundries, blow molders, investment
castings and candle molders. Recommended for use on A.B.S.
resins, acrylics, wax, rubber, polyesters, cellulosics and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This paintable lecithin release is designed for quick,
clean releases on thermosets and thermoplastics. Will not
interfere with post-finishing operations; parts can be
painted, stenciled, glued, hot stamped, plated or otherwise
decorated. Packaged in Aervoe’s GPT, it provides the
convenience of an aerosol spray with the cost savings of a
longer lasting bulk container.
Heat stable up to 500°F (260°C) Resists crazing and
stress cracking Will not mar clear polyethylene,
polystyrene, or other plastics Meets FDA regulations
Uses: Plastic wrap cutting equipment, compression molding,
gaskets and seals for tank closures, toy and furniture
manufacturing, urethanes, epoxy resins, polyesters and
polystyrenes.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Specially formulated silicone fluid that provides excellent
release properties that is ideal for all types of plastics
where decorating is required immediately after molding.
Packaged in Aervoe’s GPT, it provides the convenience of an
aerosol spray with the cost savings of a longer lasting bulk
container.
Heat stable up to 550°F (288°C) Odorless, non-staining,
non-corrosive formula Allows for multiple part releases
per application Parts can be readily decorated with all
types of solvent-based paints, enamels, and lacquers
Increases molding efficiencies Ideal for injection
molding and hot or cold molding processes Compatible with
most moldable resins, elastomer compounds, rubber, wax, and
plastic Uses: Hot or cold molding processes for rubber,
polystyrenes, polyurethane foams, plastic, metal castings, and
elastomeric materials.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Economically prices release agents that meet the needs of
compression molders that use all types of epoxy and phenolic
resins. Packaged in Aervoe’s GPT, it provides the convenience
of an aerosol spray with the cost savings of a longer lasting
bulk container.
Does not contain silicone Ideal for manufacturers of
flexible and rigid polyurethane Contains wax Easily
removed with industrial washers Uses: Epoxy molding,
polyurethane, and phenolics lamination and molding.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Food-safe mold releases that are ideal for all
polypropylene and polyurethane moldings, including toys, food
containers, closures, etc. Packaged in Aervoe’s GPT, it
provides the convenience of an aerosol spray with the cost
savings of a longer lasting bulk container.
USDA H-1 Heat stable at temperatures up to 550°F
(288°C) Meets FDA regulation 21CFR181.28 as a release
agent in the manufacture of food contacting materials
Ideal for hot or cold molds Non-staining,
non-corrosive formula Safe on rubber, wood, and most
plastics Only rinsing required prior to post decorating
Uses: Plastic injection molders, compression molders,
extruders and foundries, blow molders, investment castings,
and candle molders. Provides excellent lubricating properties
for guides, saws, conveyors, and rollers on packaging
equipment.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

A clear spray blend of solvents that removes lipstick,
pencil, ink, crayon, and spray paint from a variety of hard
surfaces. Packaged in Aervoe’s GPT, it provides the
convenience of an aerosol spray with the cost savings of a
longer lasting bulk container.
Ideal for public areas prone to graffiti abuse
Eliminates the need to sandblast and grind marks off
concrete and brick surfaces Removes stubborn marks from
road signs, washrooms, buildings, sidewalks, underpasses, and
a variety of other surfaces Safe for use on most hard,
unpainted surfaces, including concrete, brick, wood,
fiberglass, ceramic tile, Formica, and some plastics Uses:
For use on tile, brick, aluminum, steel, granite, marble,
Formica, and dozens of other hard surfaces. Removes unwanted
marks from road signs, metal panels, washrooms, public
buildings, sidewalks, underpasses, school locker rooms,
transit system buildings and vehicles, and rail cars.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Crown Penetrating Oil loosens rust and corrosion formed by
alkali, fruit acids, water, and electrolysis. Packaged in
Aervoe’s GPT, it provides the convenience of an aerosol spray
with the cost savings of a longer lasting bulk container.
USDA H-2 Displaces moisture Attacks rust and
corrosion to free frozen parts Flash point >160°F
(71°C) Dielectric strength 35kV/mm Formulated with low
surface tension for fast penetrating action Makes
disassembly of parts possible with savings in time and
material Uses: Metals, alloys, rubber, and most painted
surfaces. Release rusted and corroded nuts, pipes, pumps,
hinges, valves, screws, pulleys, shafting, mufflers, stud
bolts, heat, risers, battery cables, roller conveyers, and
wheel lug nut release.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This multi-purpose food grade lubricant leaves a clear
residual dry film that helps prevent sticking without
transferring to the surface. Slower dry allows for full
penetration into rubber surfaces. Packaged in Aervoe’s GPT, it
provides the convenience of an aerosol spray with the cost
savings of a longer lasting bulk container.
USDA H-1 5% silicone formula Will not harm most
plastics Repels water; waterproofs ignition systems
Insulates, stops squeaks and sticking, prevents freezing
Brings life back to old rubber and weather-stripping
keeping it soft and flexible Uses: Metal hinges, plastic
rollers, rubber mountings, electrical insulation, slides,
guides, conveyors, dough mixers, saws, grinders, doors, locks,
trunk lids, and any sliding surface.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

A low viscosity silicone lubricant that eliminates squeaks
and insulates and waterproofs electrical parts. Packaged in
Aervoe’s GPT, it provides the convenience of an aerosol spray
with the cost savings of a longer lasting bulk container.
USDA H-1 4% Silicone formula Odorless, colorless,
non-staining, dry residual film Prevents sticking and
won't transfer to end parts Will not interfere with carton
sealing, bottle capping, other food preparation operations
Will not harm paint, metal, wood surfaces, and most
plastics Separates from water even under acid/alkali
conditions Waterproofs ignition systems Dielectric
strength of 35kV/mm Uses: Metal hinges, plastic rollers,
guide rails, slides, or anything that sticks. Can also be used
on air tables and on food preparation equipment such as dough
mixers, food racks, knives, slicing machines, guards, saws,
etc.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This quick drying, non-flammable product removes grease
deposits, oil, metallic particles, carbon dust, and other
dangerous materials. Packaged in Aervoe’s GPT, it provides the
convenience of an aerosol spray with the cost savings of a
longer lasting bulk container.
Prevents costly flash-overs Clean warm motors in place
Provides consistent cleaning power Non-flammable,
non-corrosive formula Ideal fro removing spots and
fingerprints Fast evaporation; does not leave residues
Uses: Safe for cleaning electric motors, lathes, mining
equipment, grease fittings, molds, switches, generators,
relays, brake linings, rheostats, and fuse holders.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

This empty, Giant Pressurized Tank (GPT) is required for
application of Aervoe products through the GPT system. All
Aervoe products packaged in the GPT require a one-time
purchase of the empty tank.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Sprayer housing matches the spray tip and valve that are
used in the aerosol package of the same product. This kit is
sent at no charge with each filled GPT that is purchased.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|
The GPT Sprayer Housing is an exact
match to the tip and valve that are used in the aerosol can of
the same product. These parts, which are essential to the GPT
operation, are provided at no charge with each filled GPT that
is purchased.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

The GPT122 Hose is required for application of Aervoe
products through the GPT system. Each filled GPT that is
purchased is provided with a complete hose and sprayer housing
at no charge.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Spra-tool® is a
disposable spray gun with all the conveniences of an aerosol
can; provides a controlled spray pattern for even
coverage. Don't spend hours tediously brushing on paint,
Spra-tool® is the quick and easy way to accomplish everything
from the small craft project to touching up paint on a
vehicle. The complete kit includes the Power-Pack
(#8211), Jar with cap (#8012), Snap-on head (#8213), and two
extra tips to accommodate various product
applications.
- Interchangeable
spray tip inserts
- Ideal for fast
drying, short-life epoxies
- Convenient size
with resealable poly jar
- Fast clean-up,
no brushes, rollers, or pans
- No wires, hoses,
batteries, or bulky compressors
- Sprays most
liquids, including higher-viscosity paints such as
latex
- Safe to
transport
- 3 Easy Steps

Uses:
Metal, wood, and a variety of other surfaces depending on the
product contents. Use to cover scratches and paint blemishes
on pick-ups, forklifts, antique cars, buses, bikes, boats,
etc. Refinish shutters, desks, outdoor furniture, flag
poles, and crafts. It can also be used to protect plants
from insects and diseases.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

A 12-ounce can of propellant for the Spra-tool® Disposable
Spray Gun.
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax |
|

Easy trigger spray Graduated 11-ounce bottle For
non-paint, sprayable products
Back |
Prices Upon
Request
To Account
Holders
Via Email or Fax
|
| |
|