|
Manufactured
products
"Made-In-The-USA" include:
(Click on a product
name for more information.)
All products are available in boxed or in bulk.
All products meet or exceed ICBO, ASTM, ANSI, GSA standards. ICBO
Report #4194 and SPEC-Data Reports are available upon
request.
Pin-Drive Expansion
Anchors
- Fast
& Easy Installation: Drill-It, Drop-It and
Drive It
- Visually Inspectable When Set in Concrete
- Carbon
Steel Body with Heat Treated Setting Pin
- Zinc
& Dichromate Plated (30% better than zinc only)
- Available in Diameters: 1/4", 5/16", 318", 1/2", 5/8",
3/4" (variety of lengths)
- Meets
ICBO (see Report #4194)
- Meets
GSA, ANSI, ASTM, City of LA
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
WEDGE
ANCHORS
Standard Wedge-Type
Anchors
- Drill
Same Hole Diameter as the Anchor Diameter
- Carbon
Steel Body and Clip
- Extra
Threads on Anchor for Locking Nuts or Shims
- Raised
''Dog-Point" Above Threads Prevents Damage When
Installing
- Zinc
Plated Anchor Body, Clip, Hex Nut and Flat Washer
- Available in Diameters: 1/4", 5/16", 318", 1/2", 518",
314", 1", 1 1/4"
- Meets
ICBO (see Report #4194)
- Meets
or Exceeds ANSI, ASTM and GSA Standards
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
SECURITY ANCHORS
"Reversible Head"
Security Anchors
This unique and
patented anchor has a fully reversible security nut which is locked
to the anchor body when the pin is set.
- Sizes
Available: 1 /4", 5/16", 3/8", 1/2", 5/8''
- Drill
Same Hole Diameter as the Anchor Diameter
- Tamper
Resistant and Vibration Resistant
- Reversible Nut for "Round Head" or "Flat Head"
Applications
- Carbon
Steel Anchor Body with Hardened Setting Pin
- High
Pull-Out and Shear Strength
- Zinc
and Dichromate Plated (30% better than zinc only)
- Meets
or Exceeds ANSI, ASTM and GSA Standards
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
For Flush Mount
Concrete Anchoring
- Sizes
Available: 1/4", 5/16", 318", 1/2", 518", 3/4" (Setting
Tools Available)
- For
Flush and Shallow Embedment Anchoring Applications
- For Use
with Any Length Bolt or Threaded Rod
- Carbon
Steel Body with Hardened Setting Plug
- Available with Richmond "Rebar" Thread by Special
Order
- Zinc
& Dichromate Plated (30% better than zinc only)
- Meets
ICBO Approval (see Report #4194)
- Meets
or Exceeds ASTM, ANSI, GSA Standards
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
LIBERTY
ANCHORS
Heavy-Duty Toggle
Anchors for Hollowblock Walls, Ceilings, and Other Blind Space
Applications (Patented)
|
- Available in 1/4 X 4", 5/16 X 5", 3/8 X 6"
Lengths
- Gravity
Activated Toggle Head
- Fully
Threaded Anchor Body
- Drill
Same Hole Diameter as the Anchor Diameter
- Zinc
and Dichromate Plated for Corrosion Resistance
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
|
- Available in 3/8" and 1/2"
- Gravity
Activated Toggle Head
- Internally Threaded (USS Course Thread)
- Excellent for use in Through-Bolting Applications
(with threaded rod)
- Zinc
and Dichromate Plated for Corrosion Resistance
- Meets
or Exceeds ASTM, ANSI, GSA Standards
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
A Light to Medium
Duty Toggle Anchor for Hollowblock Walls and Other Blind Space
Applications
- Available in 1/4", 5/16" and 3/8" Diameters in a
Variety of Lengths
- Gravity
Activated Toggle Head - USS (Course Threaded)
- Zinc
and Dichromate Plated for Corrosion Resistance
- Meets
or Exceeds ASTM, ANSI, GSA Standards
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
SPLIT
DRIVE ANCHORS
A Light Duty Anchor
for Concrete, Block, and Brick.
Anchors Wood or
Steel.
|
Easy
to Install !
- Drill
1/4'' Hole through object and into concrete
- Hammer
Split Drive Anchor through material until flush
- Object
is secured !
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
- Flat
Head Design for Flush Application
- Zinc
Plated for Corrosion Resistance
- Meets
or Exceeds ASTM Standards
|
Back
CON-SERT ZINC & DICHROMATE PLATED CONCRETE
SCREWS
Hardened Concrete
Screws
for
Poured Concrete, Block, and Brick
Materials.
Back
Standard Hi-Lo
Thread
Blue Coating Concrete Screws
1/4"
& 3/16"
- Poly-Seal Blue Coating for Corrosion Resistance
- Sharp
"Gimlet" Point for Easy Starting
- 1 1/4''
Recommended Embedment
- Con-Sert HLS Screws Available:
- 1/4"
Hex = 5/16" Combo Hex/Phillips Head
- 1/4"
Phillips = #3 Phillips Head
- 3/16"
Hex = 1/4" Combo Hex/Phillips Head
- 3/16"
Phillips = #2 Phillips Head
- Available in 1 OOct Boxes with Drill Bit or Bulk
without Drill Bit
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
Back
CON-SERT #8 TOOLS FOR GOLD
SCREWS
A One-Man and
One-Tool
Combination Drill and Driver
System
(Patented)
|
Easy
to Use!
- Set
drill bit to desired embedment (tool has preset
adjustments)
- Drill
hole through object into poured concrete, block or
brick
- The
drill bit can "self-retract"
- Drive
in screw with the hex driver on the end of tool !
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
- Con-Sert Tools are available for 1/4" and #8 Diameters
up to 2 1/4" Lengths
- Zinc
and Dichromate Plated for Corrosion Resistance
- Tungsten Carbide Bit, Hex Driver and Hex Wrench (for
bit changes) Included
- Plastic
Storage Tube Included
|
Back
CON-SERT HLS TOOLS FOR BLUE
SCREWS
A One-Man
One-Tool
Combination Drill & Driver
System
|
Easy
to Use!
- Set
drill bit to desired embedment (tool has preset depth
adjustments)
- Drill
hole through object and into concrete, block or brick
- The
drill bit can self-retract !
- Drive
the screw with hex driver in the end of the tool
|
Prices Upon
Request
To
Account Holders
Via
Email or Fax |
- Con-Sert HLS Tools are available for 1/4" & 3/16"
Diameters up to 2 1/2"
- Tungsten Carbide Bit, Hex Driver and Hex Wrench (for
bit changes) Included
- Plastic
Storage Tube Included
|
Back
|
